User Guide

Teledyne API M100E Analyzer Operation Manual Remote Operation and Advanced Features
147
7.2.2.3. TRIGGER EVENTS
To edit the list of data parameters associated with a specific data channel, refer to the DATA Acquisition Menu
(refer to Figure 7-18), then press:
SETUP X.X EVENT:ATIMER
<PREV NEXT> ENTR EXIT
Edit Data Channel Menu
SETUP X.X 0) CONC1: ATIMER, 2, 4032,R
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the Main
Data Acquisition
menu
Press each key repeatedly to cycle through the
list of available trigger events.
SETUP X.X NAME:CONC1
<SET SET> EDIT PRINT EXIT
SETUP X.X EVENT:ATIMER
<SET SET> EDIT PRINT EXIT
ENTR accepts the new string
and returns to the previous
menu.
EXIT ignores the new string
and returns to the previous
menu.
Figure 7-21: iDAS – Trigger Events
7.2.2.4. EDITING IDAS PARAMETERS
Data channels can be edited individually from the front panel without affecting other data channels. However,
when editing a data channel, such as during adding, deleting or editing parameters, all data for that particular
channel will be lost, because the iDAS can store only data of one format (number of parameter columns etc.) for
any given channel. In addition, an iDAS configuration can only be uploaded remotely as an entire set of
channels. Hence, remote update of the iDAS will always delete all current channels and stored data.
04515F DCN6048