User Guide

Remote Operation and Advanced Features Teledyne API M100E Analyzer Operation Manual
154
7.2.2.10. DISABLING/ENABLING DATA CHANNELS
Data channels can be temporarily disabled, which can reduce the read/write wear on the disk-on-module. The
ALL_01 channel of the M100E , for example, is disabled by default.
To disable a data channel, follow the instruction shown in Figure 7-19, then press:
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 2, 4032, R
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT EXIT
SETUP X.X CHANNEL ENABLE:ON
<SET SET> EDIT PRINT EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X CHANNEL ENABLE:ON
OFF ENTR EXIT
Toggle key to turn
channel ON or OFF
Press SET> key until…
Figure 7-27: iDAS – Disabling / Enabling Data Channels
04515F DCN6048