User Guide

Teledyne API M100E Analyzer Operation Manual Introduction

Additional documentation for the M100E SO

Analyzer is available from Teledyne API’s website at

http://www.teledyne-api.com/manuals/

 APICOM software manual, part number 03945.

 Multidrop manual, part number 01842.

 iDAS Manual, part number 02837.

1.3.1. USING THIS MANUAL

NOTE

Throughout this manual, words printed in capital, bold letters, such as SETUP or ENTR represent

messages as they appear on the analyzer’s display.

This manual has the following structure:

TABLE OF CONTENTS

Outlines the contents of the manual in the order the information are presented. This is a good overview of the

topics covered in the manual. There is also a list of appendices, figures and tables.

SECTION I – GENERAL INFORMATION

INTRODUCTION

A brief description of the M100E analyzer architecture as well as a description of the layout of the manual

and what information is located in its various sections and chapters.

SPECIFICATIONS AND WARRANTY

A list of the analyzer’s performance specifications and if applicable a description of the conditions and

configuration under which EPA equivalency was approved as well as the Teledyne API’s warranty

statement.

GETTING STARTED

Instructions for setting up, installing and running your analyzer for the first time.

GLOSSARY

Answers to the most frequently asked questions about operating the analyzer and a glossary of acronyms

and technical terms.

OPTIONAL HARDWARE & SOFTWARE

A description of optional equipment to add functionality to your analyzer.

04515F DCN6048