User Guide

Getting Started Teledyne API M100E Analyzer Operation Manual
24
Figure 3-2: Rear Panel Layout
Table 3-2: Inlet / Outlet Connector Description
rear panel Label
Function
SAMPLE
Connect a gas line from the source of sample gas here.
Calibration gasses are also inlet here on units without zero/span/shutoff valve options
installed.
EXHAUST
Connect an exhaust gas line of not more than 10 meters long here that leads outside
the shelter or immediate area surrounding the instrument.
SPAN
On units with zero/span/shutoff valve options installed, connect a gas line to the source
of calibrated span gas here.
ZERO AIR
Internal Zero Air: On units with zero/span/shutoff valve options installed but no internal
zero air scrubber attach a gas line to the source of zero air here.
04515F DCN6048