Instructions

English - 20 -
DVD Mode
Safety Information CAUTION DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed.
CLASS 1
LASER PRODUCT
RISK OF ELECTRIC SHOCK 7KHOLJKWQLQJÀDVKZLWKDUURZKHDGV\PEROZLWKLQDQ equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the SURGXFW¶VHQFORVXUHWKDWPD\EHRIVXႈFLHQWPDJQLWXGH to constitute a risk of electric shock of persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Notes on Discs
On handling discs • To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
• Do not stick paper or tape on the disc. • If the disc is contaminated with any substance like
glue remove before using it.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature can rise quickly and damage the disc.
• After playing, store the disc in its case.
On cleaning • Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray intended for vinyl LPs.
/LFHQFH1RWL¿FDWLRQ
• This product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering and disassembly are prohibited.
How to Watch a DVD
When placing a disc into the loader, labeled side of the disc should be on the front. :KHQ79VHWLVWXUQHGRQ¿UVWVZLWFKWR'9'VRXUFHE\ using the Source button on the remote control. Press
play on the remote control, or directly press play button at the front panel. If there is no disc inside the loader, SODFHD'9'¿UVWDQGSUHVVSOD\ Note: If you switch to another source by pressing Source, Swap or Programme +/- buttons on the remote control, DVD playback will be paused automatically. You should press Play button and resume the playback manually when you switch to DVD mode.
DVD Control Panel Buttons
/ (Play / Pause)
Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc.
/ (Stop / Eject)
Stop playing disc / Eject or Load the disc. Note: • You cannot eject the disc via the remote control. • :KLOHSOD\LQJD¿OH\RXVKRXOGSUHVVSTOP button
three times to eject.
English - 21 -
General Playback
Basic Play 1. Press on the power button 2. Please insert a disc into the loader. The disc will be automatically loaded and play will commences if the disc does not have any menus recorded on it. A menu may appear on the TV screen after a few moments or the film may start immediately. This behaviour depends on the disc content and may change. Note: Step 3 and 4 is available only when a menu is recorded on the disc. 3. Press Down / Up / Left / Right or the numeric
button (s) to select the preferred title.
4. Press OK. 7RFRQ¿UPWKHVHOHFWHGLWHPV7KHSOD\HGLWHPPD\ be a motion picture, a still picture or another submenu depending on the disc. For your reference: If an action corresponding to a button is prohibited the “ ”
symbol appears.
Notes on Playback: 1. No sound will be heard during Rapid advance or
Rapid reverse.
2. No sound will be heard during Slow motion play. 3. Reverse slow motion play may not be available
depending on the dvd content.
4. In some cases, the subtitle language is not
changed immediately to the selected one.
 When the preferred language is not selected even
after pressing the button several times, it means that the language is not available on the disc.
 When the player is restarted or the disc is
changed, the subtitle selection is automatically changed back to the initial settings.
7. If a language is selected, not supported by the
disc, the subtitle language will automatically be set to the disc’s priority language.
8. Usually a circulation will happen while switching
to another language, that is you can cancel the subtitle by pressing this button a number of times until “6XEWLWOHV2ႇ” appears on the screen.
9. When the power is turned on or the disc is
removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard.
10. Some DVDs may not contain root and/or title
menus.
11. Reverse stepping is not available. 12. For your convenience: If you attempt to enter a number greater than
the total time of the current title, the time search box disappears and “
Input Invalid” message
appears on up-left corner of screen.
13. Slide Show is disabled when the ZOOM mode is on.
DVD Troubleshooting
Poor picture quality (DVD) • Make sure the DVD disc surface is not damaged.
6FUDWFK¿QJHUSULQWHWF
• Clean the DVD disc and try again. See instructions described in “Notes on Discs” to clean your disc properly. • Ensure that the DVD disc is in the tray with the label
facing upward.
• $GDPS'9'GLVFRUFRQGHQVDWLRQ PD\HႇHFWWKH
equipment. Wait for 1 to 2 hours in Stand-by to dry the equipment.
Disc does not play • No disc in the machine. Place a disc into the loader. • Disc incorrectly loaded. Ensure that the DVD disc is in the tray with the label facing upward. • Wrong type of disc. The machine cannot play CD-
ROMS etc. The region code of the DVD must match the player.
Wrong OSD language • Select the language in the set-up menu. • The language for the sound or subtitles on a DVD
cannot be changed.
• Multilingual sound and/or subtitles not recorded on
the DVD.
• Try to change the sound or subtitles using DVD’s title
menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu
• These functions are not available on the DVD. No picture • Make sure you have pressed the correct buttons on
the remote control. Try once more.
No sound • Check if volume is set to an audible level. • 0DNHVXUHWKHVRXQGLVQ¶WWXUQHGRႇE\PLVWDNH Distorted sound • Check that the appropriate listening mode setting
is correct.
If nothing works If you have tried the above solutions and none seem WRZRUNWU\VZLWFKLQJ\RXU79'9'RႇDQGRQDJDLQ If this does not work, contact your supplier or TV-DVD repair technician. Never attempt to repair a defective TV-DVD yourself.