Instructions / Assembly

Main Features
The main features of the Tasc-Pod are listed below.
•
Manufactured in anodised Aluminum
•
Has three working heights: approximately 1'11"/0.6 m, 2'8"/0.8 m and 3'4"/1.0 m
•
Automatically deployed stabiliser extensions for the 2'8"/0.8 m and 3'4"/1.0 m heights.
•
Has integral safety cage with handrails, knee rails and safety gates.
•
Can be erected in less than three minutes by a single person thereby saving down time
and man hours
•
Folds down for ease of transportation and storage and can be wheeled to and from
place of use
•
Easily transportable in a small van or estate car thereby reducing fuel costs
In the Box
Carefully remove your Tasc-Pod from the box it arrived in. It is recommended that you retain this
packaging should the item need to be returned under warranty. The following items are supplied:
•
The main assembly in collapsed form, see Figures A and B.
•
The User Manual (this publication)
Out of the Box
When you remove the Tasc-Pod from its packing box, you will find it is held closed by a fabric strap
threaded around the ladder sections and one cage side as shown above. This helps to protect the
Tasc-Pod when being transported and makes it easier to transport. Do not release the strap just yet.
It is important to leave the strap fastened particularly when it is put into trolley mode (see page 7).
To undo the strap (later), push on the sides of the two-part buckle and pull apart, Figure C. The
strap can then be undone to free the cage side and ladder sections prior to erecting the Tasc-Pod.
5
A B
C