Brochure

EarSets
The popular Telex earsets are precisely designed for inconspicuous listening while on camera.
Used by nearly all major television networks and stations, we have surpassed industry standards.
The extremely efficient miniature driver element requires only nominal operating power and
enables the announcer to hear program cues while working with a live microphone. The units are
also suitable for many other applications such as live theater script prompting.
Complete Earsets
EMV-2 includes:
RTV-04, CMT-2, AEF-3
CES-1 includes:
RTV-04, CMT-2, ET-4
CES-2 includes:
RTV-04, CMT-98, ET-4
Typical Set-up
To provide optimum versatility,
the announcer’s earset is made
up of interchangeable components
that simply snap together. Users
can construct a version of the
announcer’s earset that best suits
their particular needs.
+
Eartube
4
Complete SetEarcone
3
Receiver
2
Cord
1
++ =
+++=
Choose one each of the following components:
Cords with Volume Control
The cords with in-line volume control are equipped
with clothing clips for out of sight, waist level
positioning. To avoid loss of cues, the volume
control will not shut off completely.
I VXT-3 500 Ohm volume control with
1/4
connector
J VYT-3 2000 Ohm volume control with
1/4 connector
Earmolds/Earcones/Eartips
For maximum comfort and convenience, three
pliable earmolds (small, medium, and large) are
available for either the left or right ear. The Telethin
receiver easily attaches into the earpiece directing
sound into the ear canal and limiting ambient noise.
Earmolds
K EML-1R Large, right ear
EML-2L Large, left ear
L EMM-1R Medium, right ear
EMM-2L Medium, left ear
M EMS-1R Small, right
EMS-2L Small, left
Earcones
N BT-2 Bag of 5 small earcones for use
with ET-4
O BT-3 Bag of 5 medium earcones for use
with ET-4
P BT-4 Bag of 5 large earcones for use
with ET-4
Eartips
Q ET-1 Eartip, soft silicone tip, salmon colored,
with metal plug
R BT-1 Bag of 25 replacement eartips, salmon
colored, for use with the ET-1
IJ
Eartubes
These inconspicuous clear plastic tubes carry the
sound effectively from a Telex Telethin receiver to
the talent’s ear without revealing the cord to the
camera. The clear tubes are available in 3 versions.
All connect easily to a Telex eartip, earcone or any
size earmold and have a handy clothing clip to
secure the system in place.
S ET-2 Coiled acoustic eartube with clothing clip
for use with earmolds or eartip
T ET-4 Coiled acoustic eartube with clothing clip
for use with earcones — comes with one
each — S, M, & L earcones
U ET-3 Straight acoustic eartube with clothing clip
for use with earmolds or eartip
Earloops
The nylon or plastic covered metal earloop holds
the eartip or receiver in place on the ear.
V AEF-2 Plastic covered metal earloop
W AEF-3 Nylon earloop
Earset Components (not shown)
EH-S Earphone shell holder for all Telethin
drivers, small
EH-L Earphone shell holder for all Telethin
drivers, large
AFC-1 Under chin tube & foam cushion
QR
Telethin Magnetic Receivers
Telethin
®
Magnetic Receivers, available in 5 different
impedances, permits choice of impedance for any
application. For inconspicuous use, the receiver is
extremely small and lightweight.
A RTR-04 15 Ohms
RTV-04 125 Ohms
RTW-04 500 Ohms
RTW-04V 500 Ohms
(Telethin driver with Volume Control)
B RTX-04 1000 Ohms
RTY-04 2000 Ohms
Standard Telethin
®
Cord Sets
The standard earset system comes equipped with
a 5
, low luster gray cord with a 1/4 connector. A
variety of other cords with or without volume
controls are available as components.
C CMT-95 Straight cord with sub-miniature
straight connector
D CMT-98 Straight cord with straight
miniature connector
E CMT-2 Standard earset system cord. 5
(1.5)
with 1/4
straight connector
F CMT-92 Straight cord with right angle
miniature connector
G CCX-2 Coiled cord with right angle
miniature connector
H CCT-2 Coiled extended cord with
1/4 connector
B
A
C
F
D
G
E
H
NOP
MLK
S
T
U
3
4
WV
2
1
2
4
Amptown Sound & Communication GmbH
Wandsbeker Straße 26 • 22179 Hamburg • Tel. [phone] • Fax [phone] • eMail info
@
amptown-asc.com