User's Manual
Table Of Contents
- 1 Introduction
- 2 Block Diagram
- 3 Application Interface
- 3.1 Power Supply
- 3.2 Power-up / -down Slew-Rate
- 3.3 Reset
- 3.4 Supply Voltage Monitor
- 3.5 Serial Interface
- 3.6 GPIO Interface
- 3.7 I2C Interface0F
- 3.8 SPI Serial Peripheral Interface1F
- 1.1
- 3.9 Bluetooth Radio Interface
- 3.10 WLAN Coexistence Interface2F
- 3.11 Slow Clock Interface
- 3.12 Test Mode Enable
- 3.13 Pin Strapped System Memory Boot Mode Invocation
- 3.14 Operating in a Power-Switched Environment
- 3.15 Serial Wire Interface
- 4 Module Pins
- 5 Electrical Characteristics
- 6 Mechanical Characteristics
- 1
- 7 Application Diagram
- 8 Approvals/Certifications
- 9 Related Documents
- 10 Packing
- 11 Ordering Information
BlueMod+SR/AI
BlueMod+SR/AP
Hardware Reference
Release r04d01 www.stollmann.de Page 62 of 65
Label Information
10.3 Package Label
Package box, dry shield bag and reel are each marked with the following label:
Stollmann E+V GmbH
name
p/n
firmware
fw p/n
trace
quantity
bundle
designed and manufactured in Germany
BlueMod+SR/Ax
xxxxx-yy
SR/Vx.xxx
Mwwyy
q
BNDLxxxxxxxxxxxx
Field
Description
name Name of product
p/n Product number
firmware Firmware version
fw p/n Product number of firmware
trace [Manufacturer M (optional)]Date (YearCalendarWeek) YYWW
quantity Number of contained modules
If the label on the package box is different to the label described please contact Stollmann for
detailed information.