User manual
© imec Messtechnik GmbH · V4.0-05/2016-EN · Technical Changes and Errors excepted
imec Messtechnik GmbH
Germany
Lilienthalstraße 23
74078 Heilbronn
T +49 7066.9150 230
F +49 7066.9150 233
info@imec.de
www.imec.de
4
User Manual
For tempbase.®-D V2 Software
Device ID
tempmate.® Data logger ID
Log Interval
Record interval
Time Zone
Time Zone
Probe Mode Temperature sensor type (internal or external)
Start Mode Logger start mode (manual or timed)
Temperature Type Temperature type (Celsius or Fahrenheit)
Multiple Start/Stop Permit logger to be started or stopped for several times
Start Delay Logger start delay time
Pause Enable/Disable Permit/prohibit pause of logger
Travel ID Travel ID number
Travel DSC Travel description
Highest Temperature Max. temperature
Stop Mode (set) Stop mode-setting value
Lowest Temperature Min. temperature
Stop Mode (actual) Actual stop mode
Stop Time Stop time
Average Temperature Average temperature
Data Points The total recorded pieces
Elapsed Time The total recording time
MKT Mean kinetic temperature
Temporary PDF Permit to temporarily generate a PDF file after inserting the logger
Over Upper alarm limit
Below Lower alarm limit
Alarm delay Alarm delay time
Total Time The accumulated alarm time
Alarm Events The times alarm occurs
First Triggered First alarm time
Status Logger alarm status
Parameter Information