User manual

© imec Messtechnik GmbH · V4.0-05/2016-EN · Technical Changes and Errors excepted
imec Messtechnik GmbH
Germany
Lilienthalstraße 23
74078 Heilbronn
T +49 7066.9150 230
F +49 7066.9150 233
[e-mail]
www.imec.de
9
User Manual
For tempbase.®-D V2 Software
04. Parameter Setting
4.1 tempmate.®-M1
1. Serial Number
Shows the serial number of the connected device
2. Internal ID
Internal ID can be saved to the tempmate.®-M1
3. Log Interval
Adjust the time between the measuring points
4. Log Cycle Calculates the maximum runtime until the storage is full (battery life excluded!)
5. Probe Mode Choose whether internal or external sensor should be used
6. Password
Enable or disable password function
(PDF can’t be read out without password)
7. Set Password Choose a password with 6 digits or characters
8. Start Mode
Right now • tempmate.®-M1 starts working after disconnecting
Start by Button • tempmate.®-M1 starts after pressing “Start” for 5 seconds
Timing • Start date and time has to be set before, then tempmate.®-M1 starts
automatically when the start time is reached. It can’t be started before!
9. Start Delay Choose start delay (unlocked in “Start by Button”mode)
10. Start Time Choose start time (unlocked in “Timing” start mode)
11. Description Type your own description here
12. Temp. Unit Switch the temperature unit between “°C” and “°F”
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22 23 24 25