Quick Start Guide

Quick Setup Guide
AUDIO RESCUE
Recording of CDs or records via AUX: In-/Output:
You can also record music from other external audio sources with Line-Out
such as record players, CD/DVD players etc.. To do so, simply connect the
audio source to the AUX input of the Audio Rescue using the cinch cable (jack
to cinch) included in the delivery. Start the playback of the external audio
source and the Audio Rescue starts directly with the conversion by pressing
the recording key.
Playback:
Using the playback function you can directly check the recorded title. Press
the playback key in the Stand-by mode and the Audio Digitzer SD starts pla-
ying the recorded title – the LED flashes slowly. During the playback you can
browse through the individual titles by pressing the keys  / .
Please note that if you copy music in another way on the Micro-SD card, such
titles have to be located on the Audio Rescue in the folder “TAPEMP3” for
playback, otherwise it is not possible to play them back.
Technical data:
Audio format: MP3
Power supply: 2 x AA batteries, via USB or an optional power supply unit
Format Micro-SD card: FAT, FAT32, exFAT – up to 32GB
Battery lifetime: Up to 2 hours
Audio channels: Stereo L/R
Bit rate: 128 kbps
Dimensions: 11.3 x 8.2 x 3.2 cm
Weight: 186 g (without batteries)
Scope of delivery: Audio Digitizer, USB cable on jack, jack plug on 2 x jack
plug socket, jack plug on 2 x cinch), head phones, manual,
batteries