Datasheet

testo Saveris
testo Saveris Converter V 2.0 /
testo Saveris Extender
testo Saveris Router
testo Saveris wireless probes
testo Saveris Analog Coupler (wireless)
Ethernet
testo Saveris Analog Coupler (Ethernet)
Humidity transmitter
testo Saveris system overview
testo Saveris wireless probes
Probe versions with internal as well
as external temperature and humidity
sensors allow the adaptation to any
application. The wireless probes are
available optionally with or without
display. The current measurement
data, the battery status and the quality
of the wireless connection are shown.
testo Saveris Converter/Extender
By connecting a testo Saveris
Converter or Extender to an Ethernet
socket, the signal from a wireless
probe can be converted into an
Ethernet signal. This combines the
flexible installation of a wireless probe
with the exploitation of the existing
Ethernet even over long transmission
distances.
Humidity and dierential pressure transmitters
testo 6651/6681/6351/6381/6383
The integration of the humidity and differential pressure
transmitters allows control parallel to the measurement data
monitoring. This offers the solution for highest accuracy
as well as for special applications (high humidity, trace
humidity etc.) in compressed air, drying and air conditioning
technology.
testo Saveris Router
The use of a Router can improve or
extend the wireless connection in
difficult constructional circumstances.
Several Routers in the testo Saveris
system are of course possible. At the
same time, the serial switching of up
to 3 Routers V 2.0 provides the highest
level of flexibility regarding wireless
range.
testo Saveris Analog Coupler
The two versions of the Analog Coupler (wireless/Ethernet)
allow the integration of further measurement parameters
into the testo Saveris monitoring system, by including all
transmitters with standardized current/voltage interfaces,
e.g. 4 to 20 mA or 0 to 10 V.