Datasheet

testo Saveris
USB or Ethernet
testo Saveris Base
Ethernet
testo Saveris Ethernet probes
testo Saveris software
testo Saveris Cockpit UnitEthernet
testo Saveris Extender
testo Saveris Base
The Base is the heart of testo Saveris, and can store
40,000 measurement values per measurement channel
independently of a PC. This corresponds to a storage
capacity of approximately a year at a measurement rate of
15 minutes. System data and alarms are visible via the testo
Saveris Base display.
testo Saveris Extender
By connecting a testo Saveris
Extender, the wireless signal of a
transport probe (mobile probe) is
converted into an Ethernet signal. The
data transfer from wireless probe to
Extender takes place automatically
when sufficient wireless connection is
present.
testo Saveris Cockpit Unit
The testo Saveris Cockpit Unit
displays all measurement values to the
driver uninterruptedly during transport.
If limit values are violated, the driver
is immediately warned. Alternatively,
the complete data recording can be
printed out at the handover site of the
goods using the Testo printer on the
Cockpit Unit.
testo Saveris Ethernet probes
In addition to the wireless probes,
probes can be used which can be
directly connected to the Ethernet.
This means that an existing LAN
structure can be used, allowing the
data transfer from probe to Base even
over large distances.
testo Saveris software
All temperature and humidity values are collated and
documented without interruption here. Depending on
requirements, the software is available in three versions:
as a basic version SBE (Small Business Edition), as an
extended version PROF (Professional), or as a validatable
CFR version. Operation is easy thanks to an intuitive
user interface. And to round it all off, you can view the
measurement data flexibly on various mobile end devices.