Datasheet

Development Support (Continued)
DIAL-A-HELPER
Dial-A-Helper is a service provided by the Microcontroller
Applications group. Dial-A-Helper is an Electronic Bulletin
Board Information system and additionally, provides the ca-
pability of remotely accessing the development system at a
customer site.
INFORMATION SYSTEM
The Dial-A-Helper system provides access to an automated
information storage and retrieval system that may be ac-
cessed over standard dial-up telephone lines 24 hours a
day. The system capabilities include a MESSAGE SECTION
(electronic mail) for communications to and from the Micro-
controller Applications Group and a FILE SECTION which
consists of several file areas where valuable application
software and utilities can be found. The minimum require-
ment for accessing Dial-A-Helper is a Hayes compatible mo-
dem.
If the user has a PC with a communications package then
files from the FILE SECTION can be down loaded to disk for
later use.
Order P/N: MDS-DIAL-A-HLP
Information system package contains:
DIAL-A-HELPER Users Manual
Public Domain Communications Software
FACTORY APPLICATIONS SUPPORT
Dial-A-Helper also provides immediate factory applications
support.
Development Tools Selection Table
Order
Description
Manual
Number Number
NSC
HPC-DEV-IBMA User’s manuals and disks for Assembler/Linker/Librarian package for the IBM PC 424410836-001
HPC-DEV-IBMC User’s manuals and disks for C Compiler and Assembler/Linker/Librarian package for the 424410883-001
IBM PC 424410836-001
HPC-DEV-HDB User’s manuals and disks for Source Symbolic Debugger, C Compiler and Assembler/Linker/ 424421640-001
Librarian Package for the IBM PC 424410883-001
For use with the HP system only 424410836-001
Signum
USP-HPC Base UnitÐUser’s manual and screen debugger
POD-HPC164 30 MHz POD and interface board for HPC46164
POD-HPC064 30 MHz POD and interface board for HPC46064
POD-HPC083 30 MHz POD and interface board for HPC46083
POD-HPC100 40 MHz POD and interface board for HPC46100
POD-HPC164-3 20 MHz 3.3V POD and interface board for HPC43164
POD-HPC064-3 20 MHz 3.3V POD and interface board for HPC43064
POD-HPC100-3 30 MHz 3.3V POD and interface board for HPC43100
Hewlett Packard
64700A Card cage
64706A 48 Channel Analyzer
64775S Software interface
OPT006 Software interface to IBM PC
64775G HPC16083 Emulator with 128K RAM
64775H HPC16064 Emulator with 128K RAM
64775J HPC16400E Emulator with 128K RAM
64701A LAN Interface (Optional)
Contact your local NSC sales office for ordering information
The Signum system comes with power supply, base unit software, RS232 link to host and emulator pod for the HPC Family member
ordered. It also includes an interface connector that fits between the POD and the Target board. This system does not support
deelopment of HPC46400E based systems. Source symbolic debug capability for both assembly and C language is included in the
screen debugger.
The HP model 64775 emulator/analyzer provides in system emulation up to 20 MHz, 0 wait state memory, and 30 MHz, 1 wait state
memory for al devices except the HPC46400E, which is 20 MHz, 1 wait state. A reverse assembler is also available.
The recommended configuration for the IBM PC compatible host is a 386 or higher running DOS 3.0 or higher with 4 MB of
extended memory. An RS232 serial port capable of running at 19.2K baud and a three button mouse is recommended for the
Signum System interface.
32