Operation Manual

Examples

Each section is followed by instructions for keystroke

examples that demonstrate the TI-30XS MultiView™ and

TI-30XB MultiView functions. All references in this manual will

refer to the TI-30XS MultiView, but are also applicable for the

TI-30XB MultiView.

Examples assume all default settings, as shown in the Modes

section.

For more activities and examples, see the TI-30XS

MultiView™ Teacher Guide available at education.ti.com/

guides.

Switching the

TI-30XS MultiView

calculator on

and off

& turns on the TI-30XS MultiView calculator. % '

turns it off. The display is cleared, but the history, settings,

and memory are retained.

The APD™ (Automatic Power Down™) feature turns off the

TI-30XS MultiView calculator automatically if no key is

pressed for about 5 minutes. Press & after APD. The

display, pending operations, settings, and memory are

retained.

Display contrast

The brightness and contrast of the display can depend on

room lighting, battery freshness, and viewing angle.

To adjust the contrast:

1. Press and release the % key.

2. Press T (to darken the screen) or U (to lighten the

screen).