Ethernet Media Access Controller (EMAC)/ Management Data Input/Output (MDIO) Module User's Guide

www.ti.com
3.7 EMAC Control Module Transmit Interrupt Enable Register (CMTXINTEN)
EMAC Control Module Registers
The transmit interrupt enable register (CMTXINTEN) is shown in Figure 19 and described in Table 16 .
Figure 19. EMAC Control Module Transmit Interrupt Enable Register (CMTXINTEN)
31 16
Reserved
R-0
15 8 7 0
Reserved TXPULSEEN
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; - n = value after reset
Table 16. EMAC Control Module Transmit Interrupt Enable Register (CMTXINTEN)
Field Descriptions
Bit Field Value Description
31-8 Reserved 0 Reserved
7-0 TXPULSEEN[ n] Transmit interrupt (TXPEND n) enable. Each bit controls the corresponding channel n transmit
interrupt.
Bit n = 0,channel n transmit interrupt (TXPEND n) is disabled.
Bit n = 1, channel n transmit interrupt (TXPEND n) is enabled.
SPRUEQ6 – December 2007 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) 65
Submit Documentation Feedback