Ethernet Media Access Controller (EMAC)/ Management Data Input/Output (MDIO) Module User's Guide

www.ti.com
3.8 EMAC Control Module Miscellaneous Interrupt Enable Register (CMMISCINTEN)
EMAC Control Module Registers
The miscellaneous interrupt enable register (CMMISCINTEN) is shown in Figure 20 and described in
Table 17 .
Figure 20. EMAC Control Module Miscellaneous Interrupt Enable Register (CMMISCINTEN)
31 16
Reserved
R-0
15 4 3 2 1 0
Reserved STATPENDINTEN HOSTPENDINTEN LINKINTEN USERINTEN
R-0 R/W-0 R/W-0 R/W-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; - n = value after reset
Table 17. EMAC Control Module Miscellaneous Interrupt Enable Register (CMMISCINTEN)
Field Descriptions
Bit Field Value Description
31-4 Reserved 0 Reserved
3 STATPENDINTEN EMAC module statistics interrupt (STATPEND) enable.
0 EMAC module statistics interrupt (STATPEND) is disabled.
1 EMAC module statistics interrupt (STATPEND) is enabled.
2 HOSTPENDINTEN EMAC module host error interrupt (HOSTPEND) enable.
0 EMAC module host error interrupt (HOSTPEND) is disabled.
1 EMAC module host error interrupt (HOSTPEND) is enabled.
1 LINKINTEN MDIO module link change interrupt (LINKINT) enable.
0 MDIO module link change interrupt (LINKINT) is disabled.
1 MDIO module link change interrupt (LINKINT) is enabled.
0 USERINTEN MDIO module user interrupt (USERINT) enable.
0 MDIO module user interrupt (USERINT) is disabled.
1 MDIO module user interrupt (USERINT) is enabled.
66 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) SPRUEQ6 – December 2007
Submit Documentation Feedback