Ethernet Media Access Controller (EMAC)/ Management Data Input/Output (MDIO) Module User's Guide

www.ti.com
3.13 EMAC Control Module Receive Interrupts per Millisecond Register (CMRXINTMAX)
3.14 EMAC Control Module Transmit Interrupts per Millisecond Register (CMTXINTMAX)
EMAC Control Module Registers
The receive interrupts per millisecond register (CMRXINTMAX) is shown in Figure 25 and described in
Table 22 .
Figure 25. EMAC Control Module Receive Interrupts per Millisecond Register (CMRXINTMAX)
31 16
Reserved
R-0
15 6 5 0
Reserved RXIMAX
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; - n = value after reset
Table 22. EMAC Control Module Receive Interrupts per Millisecond Register (CMRXINTMAX)
Field Descriptions
Bit Field Value Description
31-6 Reserved 0 Reserved
5-0 RXIMAX 2-3Fh Receive interrupts per millisecond. The maximum number of interrupts per millisecond generated on
RX_PULSE, if pacing is enabled for this interrupt. Valid values are 2 to 63.
0-1h Reserved
The transmit interrupts per millisecond register (CMTXINTMAX) is shown in Figure 26 and described in
Table 23 .
Figure 26. EMAC Control Module Transmit Interrupts per Millisecond Register (CMTXINTMAX)
31 16
Reserved
R-0
15 6 5 0
Reserved TXIMAX
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; - n = value after reset
Table 23. EMAC Control Module Transmit Interrupts per Millisecond Register (CMTXINTMAX)
Field Descriptions
Bit Field Value Description
31-6 Reserved 0 Reserved
5-0 TXIMAX 2-3Fh Transmit interrupts per millisecond. The maximum number of interrupts per millisecond generated on
TX_PULSE, if pacing is enabled for this interrupt. Valid values are 2 to 63.
0-1h Reserved
70 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) SPRUEQ6 – December 2007
Submit Documentation Feedback