Operation Manual

Setting 3
6a 6b 6c
Lock Pin
USER GUIDE USER GUIDE
14
USER’S GUIDE
E. Setting Up the Total Flex
™
Opening the Total Flex
™
To open the Total Flex
™
(see 1 to 6 below), place the Total Flex
™
on a level surface
(1), remove Cover (optional item) (2), hold the Carry Handle with one hand (3),
move the Support Leg with the roller wheels (the leg with no Power Pods) sideways
(4) until it is fully opened (5) and adjust the Seat (6).
7
USER’S GUIDE
• The Head Rest has 4 settings to accommodate various body types. Engage
the setting suitable for your body type.
Important: Check that the Lock Pin engages fully when released.
6. Leg Extender (Optional Item)
The Leg Extender is an attachment for exercising the legs.
Note: Before using the Leg Extender, make sure that the Receptor Tube Assembly
is attached to the underside of the Power Pod Seat (see D – Leg Extender Assembly
on page 4).
Important: When attaching or detaching the Leg Extender, ensure that the
Resistance Bands are disengaged (unhooked) from the Leg Extender Hook.
• Connecting the Leg Extender to the Power Pod Seat.
Important: When using the Leg Extender, adjust the Seat (with Receptor Assembly)
to setting 3 – this is the only setting that must be used (see 6a below).
- Attach the Leg Extender by pulling the Lock Pin on the underside of the
Power Pod Seat and insert the Attachment Tube into the Receptor Tube
(see 6b below).
- The Leg Extender has 2 settings to accommodate various leg lengths.
Engage the setting suitable for your legs (see 6c below).
Important: Check that the Lock Pin engages fully when released.
1 2 3
4 5 6