Full Product Manual

Litonet EVO
Litonet Gel EVO
946GR
109GBNC
128G0001
Litostrip
Litonet PRO
66
For correct use and further information,
consult the technical and safety data sheets on www.litokol.it
You may also need:Application phases:
1
Empty the entire contents of the catalyst (B) onto the paste
(A).
2
Special finishes: pour the additive onto the paste and mix
slowly.
3
Mix using an electric drill fitted with a mixing paddle.
Scrape the sides of the bucket to eliminate all parts of
non-catalysed product.
4
The joints must be dry. Apply the paste in the joints using a
green rubber float (art. 946GR), with diagonal movements
in the direction of the joints. Remove the excess product.
5
The grout must be cleaned while the product is still wet.
Sprinkle clean water. Clean initially using a moistened white
felt pad (art. 109/GBNC) making circular movements. En-
sure no water enters the joints.
6
Clean a second time with a sweepex sponge
(art. 128G0001).
7
Any stains of the transparent product can be removed after
24 hours or, in any case, after the joint has hardened. Use
Litonet EVO (floors) and Litonet Gel EVO (walls). Spread
Litonet EVO or Litonet Gel EVO with the white felt pad.
8
Leave on for 15-30 minutes. Rub the surface with the white
felt pad.
9
Rinse with clean water. Dry immediately with a clean cloth
and do not wait for the rinse water to evaporate.
A
B
Litonet EVO
Litonet Gel EVO