Product Brochure

1
Empty completely all the contents
of the catalyst (B) onto the paste
(A).
2
Mix using an electric drill equipped
with mixing paddle. Scrape the
walls of the bucket to eliminate all
parts of non-catalysed product.
3
The joints must be dry. Apply
the paste in the joints using a
green rubber oat (item 946GR),
with diagonal movements in the
direction of the joints. Remove the
excess product.
4
The grout must be cleaned while
the product is still wet. Sprinkle
clean water. Initial cleaning with a
damp white felt (item 109GBNC)
and circular movements. Ensure
no water enters the joints.
5
Second cleaning cycle with a swe-
epex sponge (item 128G0001).
6
Any stains of the transparent
product can be removed after 24
hours or anyway after the gap has
hardened. Use LITONET (oors)
or LITONET GEL (walls). Spread
Litonet or Litonet Gel with the
white felt.
7
Leave on for 15-30 minutes. Scrub
the surface with the white felt.
8
Rinse with clean water.
Dry immediately with a clean cloth
and do not wait for the evapora-
tion of the rinse water.
946GR
109GBNC
Litostrip
128G0001
Litonet/Litonet Gel
Litonet PRO
Application phases: You may also require:
39
38