Wave Roller
Wave Roller™ Smart Vibrating Foam Roller from the makers of Theragun.
Using the Wave Roller™ 1. To turn on the Wave Roller, firmly press and hold the power button for 1-2 seconds. 2. Wave Roller will start on the lowest of five settings. To increase speed, short press the plus button until desired speed is active. 3. Place the device under the treatment area gradually applying light to moderate pressure as needed. 4. To turn off the Wave Roller, firmly press and hold the power button until the device turns off.
Charging the Wave Roller™ 1. After turning off the device, plug the power adapter into the charging port. 2. The LED light on the power button will flash until fully charged. Charging the Wave Roller Wirelessly Battery level on the Wave Roller is indicated with the following colors: 3. Charging is complete when the LED light on the power button is solid green. Flashing red: Low charge 4. Battery level is continuously displayed on the LED light of the power button when the device is on.
