manual
Table Of Contents
- Table of ContentsUse and care manual
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- WARNING
- Fire Safety
- WARNING
- to reduce the risk of a grease fire:
- a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
- b. Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
- c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
- d. Use proper pan size. Always use cookware appropriate for the size of the surface element.
- WARNING
- TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
- a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
- b. NEVER PICK UP A FLAMING PAN – You may be burned.
- c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
- d. Use an extinguisher ONLY if:
- Cooking Safety
- Burn Prevention
- Child Safety
- Cleaning Safety
- Cookware Safety
- Proper Installation and Maintenance
- Electromagnetic interference
- Cooling fan
- State of California Proposition 65 Warnings:
- Causes of damageCauses of damage
- Protecting the Environment
- Cooking with Induction
- Familiarizing yourself with your applianceFamiliarizing yourself with your appliance
- Operating the Appliance
- First-time use
- Switching the cooktop on and off
- Setting a cooking position
- Chef's recommendations
- Timer functionsTimer functions
- Cook Timer
- Setting the Cook Timer
- 1. Select the cooking position and the required power level.
- 2. Touch the selected power level. The + symbol will light up in the cooking position display.
- 3. Touch the + symbol. 00|00 ‹ will light up on the cooking position display.
- 4. Then select the required cooking time in hours and minutes.
- 5. Touch the < symbol to confirm the selected time. The time you have set will appear in the cooking position display.
- Cooking Sensor mode
- Changing or deleting the time
- When the time has elapsed
- Stopwatch Timer
- Activating the Stopwatch Timer
- Pausing the Stopwatch Timer
- Deactivating
- Note:
- Kitchen Timer
- Setting the Kitchen Timer
- 1. Touch the TIMERS touch button.
- 2. Touch the . symbol and confirm your choice by touching the 8 symbol. óóEóó.óóÕ will light up in the display.
- 3. Within the next 10 seconds, scroll up or down with your finger and set the time in minutes, hours and seconds.
- 4. Touch the < symbol to confirm your chosen setting. The . symbol and the selected time will light up in the function bar.
- Changing or deleting the time
- Pausing the Kitchen Timer
- When the time has elapsed
- PowerBoost® Function
- PanBoost™ Function
- Keep Warm
- Transfer function
- Wireless Cooking Sensor
- Preparing and caring for the wireless cooking sensor
- Gluing on the silicone patch
- 1. The part of the cookware to which the patch is to be adhered must be free of grease. Clean the pan, dry it thoroughly and wipe the area where the patch is to be adhered with an all purpose degreasing agent.
- 2. Remove the protective film from the silicone patch. Adhere the silicone patch in the correct place on the outside of the pot using the supplied template as a guide.
- 3. Press down all over the surface of the silicone patch, including in the center.
- Notes
- Attaching the wireless cooking sensor
- Notes
- Connecting the wireless cooking sensor to the control panel
- 1. Touch the " symbol on the main screen.
- 2. Select the Cooking sensor pairing option and then touch the 8 symbol to confirm.
- 3. Briefly touch the ¨ symbol on the wireless cooking sensor within the next 30 seconds.
- 4. To connect a different cooking sensor, touch the 8 symbol. To return to the basic settings, touch the 9 symbol.
- Notes
- Resetting the wireless cooking sensor
- 1. Touch and hold the ¨ symbol on the cooking sensor for 8-10 seconds.
- 1. Remove the silicone cover from the lower section of the cooking sensor casing and remove both screws using a screwdriver.
- 1. this device may not cause interference, and
- Cooking Sensor Mode
- Temperature °F (°C)
- Cookware
- Suitable for
- Advantages
- Notes
- Tips for cooking with cooking sensor mode
- Notes
- Setting the boiling point
- Note:
- Setting procedure
- 1. Attach the wireless cooking sensor to the saucepan; see the section entitled ~ "Preparing and caring for the wireless cooking sensor"
- 2. Fill the cookware with a sufficient amount of liquid, put the lid on and place it on the cooking surface. See the section entitled ~ "Attaching the wireless cooking sensor".
- 3. Tap the cooking position display for the cookware.
- 4. Touch the ¢ symbol.
- 5. Use your finger to scroll up to the n symbol. Then touch the 8 symbol to confirm your choice.
- 6. Touch the ¨ symbol on the wireless cooking sensor as shown on the display.
- 7. Select the temperature level.
- 8. Once the signal tone has sounded, remove the lid and add the food. Leave the lid on while cooking.
- Note:
- Deactivating
- 1. Touch the temperature level.
- 195 (90)
- 10 - 20
- 212 (100)
- 20 - 30
- 212 (100)
- 60 - 90
- 212 (100)
- 60 - 90
- 240 (115)
- 15 - 25
- 240 (115)
- 15 - 25
- 340 (170)
- 10 - 15
- 340 (170)
- 10 - 15
- 195 (90)
- 15 - 20
- 340 (170)
- 10 - 15
- 340 (170)
- 10 - 15
- 212 (100)
- 5 - 10
- 212 (100)
- 10 - 20
- 212 (100)
- 10 - 20
- 212 (100)
- 5 - 10
- 212 (100)
- 30 - 40
- 212 (100)
- 15 - 30
- 212 (100)
- 60 - 90
- 212 (100)
- 15 - 20
- 212 (100)
- 45 - 60
- 240 (115)
- 3 - 6
- 240 (115)
- 25 - 35
- 240 (115)
- 25 - 35
- 240 (115)
- 10 - 20
- 340 (170)
- 4 - 8
- 340 (170)
- 4 - 8
- 340 (170)
- 4 - 8
- 340 (170)
- 4 - 8
- 185 (85)
- 30 - 40
- 212 (100)
- 3 - 6
- 212 (100)
- 30 - 45
- 212 (100)
- 30 - 45
- 240 (115)
- 10 - 20
- 240 (115)
- 10 - 20
- 320 (160)
- 8 - 12
- 185 (85)
- 5 - 10
- 195 (90)
- 25 - 35
- 195 (90)
- 45 - 55
- 195 (90)
- 8 - 12
- 195 (90)
- 20 - 30
- 195 (90)
- 10 - 12
- 185 (85)
- 3 - 8
- 212 (100)
- 7 - 10
- 212 (100)
- 3 - 5
- 212 (100)
- 7 - 10
- 212 (100)
- 15 - 20
- 212 (100)
- 5 - 8
- 240 (115)
- 6 - 8
- 240 (115)
- 12 - 18
- 195 (90)
- 10 - 15
- 212 (100)
- 60 - 90
- 212 (100)
- 5 - 10
- 240 (115)
- 20 - 30
- 185 (85)
- 40 - 50
- 185 (85)
- 10 - 15
- 185 (85)
- 3 - 5
- 212 (100)
- 15 - 25
- 320 (160)
- 5 - 10
- 320 (160)
- 5 - 10
- 320 (160)
- 5 - 10
- 155 (70)
- 15 - 20
- 212 (100)
- 15 - 30
- 350 (180)
- 4 - 8
- 155 (70)
- 10 - 20
- 155 (70)
- 5 - 15
- 185 (85)
- 3 - 10
- MyZone™
- Notes
- Activation
- 1. Tap the cooking position display for the cookware.
- 2. Touch the ¢ symbol.
- 3. Use your finger to scroll down to the symbol. Then touch the 8 symbol to confirm your choice.
- 4. Move the cookware over the cooking surface until the power level you require is set. The power level you have selected will appear on the cooking position display.
- Note:
- Changing the power level
- Note:
- Deactivating
- 1. Touch the power level.
- TeppanyakiPro™ Mode
- Panel Lock
- Pause function
- Automatic Shutoff
- Basic Settings
- MyZone™
- ’
- CAL
- --------
- Home Connect
- Notes
- Connection to your home network
- Setting up the Home Connect app
- Note:
- 1. On your mobile device, go to the App Store (Apple devices) or to the Google Play Store (Android devices).
- 2. Enter "Home Connect" in the search field.
- 3. Select the Home Connect app and install it on your mobile device.
- 4. Start the app and create your Home Connect login details. The app will guide you through the registration process. Make a note of your e-mail address and password.
- Automatic Registration in the Home Network
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Scroll left or right with your finger and select the E Home Connect setting.
- 3. The conditions needed to establish a Home Connect connection will be displayed. Touch the 8 symbol to confirm.
- 4. Select the Automatic option and touch the 8 symbol to confirm your choice.
- 5. Press the WPS button on your router within 2 minutes, as shown on the display.
- 6. A message will be displayed to notify you when the cooktop is successfully connected to your home network. Confirm by touching the 8 symbol.
- 7. Now open the Home Connect app on your mobile device and follow the connection instructions on the display.
- 8. A message will be displayed to confirm that connection to the app has been successful. Touch the 8 symbol to confirm.
- Note:
- Manual Registration in the Home Network
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Scroll left or right with your finger and select the E Home Connect setting.
- 3. The conditions needed to establish a Home Connect connection will be displayed. Touch the 8 symbol to confirm.
- 4. Select the Manual option and confirm by touching the 8 symbol.
- 5. A message will appear on the display for opening the network settings of the mobile device. Touch the 8 symbol to confirm.
- 6. You now have 5 minutes to register the mobile device with the SSID "HomeConnect" and the password "HomeConnect".
- 7. Then open the Home Connect app on your mobile device.
- 8. A message will be displayed to notify you when the cooktop is successfully connected to your home network. Confirm by touching the 8 symbol.
- 9. Now open the Home Connect app on your mobile device and follow the connection instructions on the display.
- 10. A message will be displayed to confirm that connection to the app has been successful. Touch the 8 symbol to confirm.
- Note:
- Home Connect Settings
- E
- ø
- }
- ú
- --------
- Note:
- Wi-Fi symbols
- E
- Deactivate Wi-Fi
- Note:
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- Software Update
- Information on Data Protection
- Wi-Fi® Module
- Cooktop - Hood Sync
- Notes
- Setting up a connection
- Connecting directly
- Note:
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.
- 3. Select the "Cooktop - Hood Sync" option and touch the 8 symbol to confirm.
- 4. You have 2 minutes to initiate the connection process on the hood. See hood operating instructions.
- Connecting via your home network
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.
- 3. Select the Home Connect option and touch the 8 symbol to confirm.
- 4. Press the WPS button on the router within the next 2 minutes.
- 5. You have 2 minutes to initiate the connection process on the hood. See hood operating instructions.
- Note:
- Disconnecting from the network
- Controlling the hood via the cooktop
- Ventilation control settings
- A
- 9
- 6
- ¾
- ú
- --------
- Cleaning and Maintenance
- Frequently-asked questions and answers (FAQ)
- Troubleshooting
- STATEMENT OF LIMITED PRODUCT WARRANTY
- THERMADOR® Support
- READ AND SAVE THESE INSTRUCTIONS
24
Cooking Sensor Mode
The cooking sensor processes make cooking easy and
produce exceptional results.
The wireless cooking sensor measures the temperature
of the cookware continuously. This enables the cooking
power to be controlled and the right temperature to be
maintained at all times. This in turn prevents overheating
and ensures perfect results.
You can add your food once the selected temperature
has been reached. The temperature is maintained
without you having to change the power level.
Provided there is a wireless cooking sensor, Cooking
Sensor mode is available over the entire cooking
surface.
The wireless cooking sensor forwards information about
the temperature of the cookware to the control panel.
You will need a wireless cooking sensor in order to use
the cooking sensor function.
Cooking sensors (TCOOKSENSW) and additional silicon
patches (00577921) can be purchased from the
THERMADOR
®
eShop or by contacting Customer
Support.
You can use up to three cooking sensors at the same
time.
For more information about the cooking sensor, see the
section entitled ~ "Wireless Cooking Sensor"
Cooking processes with the cooking sensor
Cooking Sensor mode is used to select the best cooking
method for each kind of food.
The table shows the different cooking processes that are
available:
Advantages
▯ The cooking position is only powered when this is
necessary to maintain the temperature. This saves
energy.
▯ The temperature is maintained continuously. This
prevents the food from boiling over. It also means that
you do not have to change the temperature setting.
▯ Cooking Sensor mode will tell you when the water or
oil has reached the optimal temperature for adding the
food (see the exceptions where the food should be
added at the very beginning).
Notes
▯ Use pots or cookware with a thick, flat base. Do not
use pots with a thin or deformed base.
▯ Fill the pot so that the contents reach high enough to
cover the cooking sensor's silicone patch.
▯ Do not remove the cooking sensor from the pot during
cooking.
▯ Remove the cooking sensor from the pot after
cooking. Be careful as the cooking sensor may be
very hot.
Cooking processes Temperature
°F (°C)
Cookware Suitable for
Keeping warm, heating 155 (70) E.g. punch, goulash
Simmering in milk 185 (85) E.g. panna cotta, rice pudding
Simmering in water 195 (90)
E.g. potato dumplings, rice,
quinoa
Boiling 212 (100) E.g. pasta, gnocchi, vegetables
Cooking in a pressure cooker 240 (115)
E.g. home-made broths,
legumes
Deep fat frying at a low temperature* 320 (160) E.g. donuts, fritters
Deep fat frying at a medium temperature* 340 (170) E.g. breaded fish, dumplings
Deep fat frying at a high temperature* 350 (180) E.g. frozen French fries
*Heat oil with the lid on and fry with the lid off.