manual
Table Of Contents
- Table of ContentsUse and care manual
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- WARNING
- Fire Safety
- WARNING
- to reduce the risk of a grease fire:
- a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
- b. Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
- c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
- d. Use proper pan size. Always use cookware appropriate for the size of the surface element.
- WARNING
- TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
- a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
- b. NEVER PICK UP A FLAMING PAN – You may be burned.
- c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
- d. Use an extinguisher ONLY if:
- Cooking Safety
- Burn Prevention
- Child Safety
- Cleaning Safety
- Cookware Safety
- Proper Installation and Maintenance
- Electromagnetic interference
- Cooling fan
- State of California Proposition 65 Warnings:
- Causes of damageCauses of damage
- Protecting the Environment
- Cooking with Induction
- Familiarizing yourself with your applianceFamiliarizing yourself with your appliance
- Operating the Appliance
- First-time use
- Switching the cooktop on and off
- Setting a cooking position
- Chef's recommendations
- Timer functionsTimer functions
- Cook Timer
- Setting the Cook Timer
- 1. Select the cooking position and the required power level.
- 2. Touch the selected power level. The + symbol will light up in the cooking position display.
- 3. Touch the + symbol. 00|00 ‹ will light up on the cooking position display.
- 4. Then select the required cooking time in hours and minutes.
- 5. Touch the < symbol to confirm the selected time. The time you have set will appear in the cooking position display.
- Cooking Sensor mode
- Changing or deleting the time
- When the time has elapsed
- Stopwatch Timer
- Activating the Stopwatch Timer
- Pausing the Stopwatch Timer
- Deactivating
- Note:
- Kitchen Timer
- Setting the Kitchen Timer
- 1. Touch the TIMERS touch button.
- 2. Touch the . symbol and confirm your choice by touching the 8 symbol. óóEóó.óóÕ will light up in the display.
- 3. Within the next 10 seconds, scroll up or down with your finger and set the time in minutes, hours and seconds.
- 4. Touch the < symbol to confirm your chosen setting. The . symbol and the selected time will light up in the function bar.
- Changing or deleting the time
- Pausing the Kitchen Timer
- When the time has elapsed
- PowerBoost® Function
- PanBoost™ Function
- Keep Warm
- Transfer function
- Wireless Cooking Sensor
- Preparing and caring for the wireless cooking sensor
- Gluing on the silicone patch
- 1. The part of the cookware to which the patch is to be adhered must be free of grease. Clean the pan, dry it thoroughly and wipe the area where the patch is to be adhered with an all purpose degreasing agent.
- 2. Remove the protective film from the silicone patch. Adhere the silicone patch in the correct place on the outside of the pot using the supplied template as a guide.
- 3. Press down all over the surface of the silicone patch, including in the center.
- Notes
- Attaching the wireless cooking sensor
- Notes
- Connecting the wireless cooking sensor to the control panel
- 1. Touch the " symbol on the main screen.
- 2. Select the Cooking sensor pairing option and then touch the 8 symbol to confirm.
- 3. Briefly touch the ¨ symbol on the wireless cooking sensor within the next 30 seconds.
- 4. To connect a different cooking sensor, touch the 8 symbol. To return to the basic settings, touch the 9 symbol.
- Notes
- Resetting the wireless cooking sensor
- 1. Touch and hold the ¨ symbol on the cooking sensor for 8-10 seconds.
- 1. Remove the silicone cover from the lower section of the cooking sensor casing and remove both screws using a screwdriver.
- 1. this device may not cause interference, and
- Cooking Sensor Mode
- Temperature °F (°C)
- Cookware
- Suitable for
- Advantages
- Notes
- Tips for cooking with cooking sensor mode
- Notes
- Setting the boiling point
- Note:
- Setting procedure
- 1. Attach the wireless cooking sensor to the saucepan; see the section entitled ~ "Preparing and caring for the wireless cooking sensor"
- 2. Fill the cookware with a sufficient amount of liquid, put the lid on and place it on the cooking surface. See the section entitled ~ "Attaching the wireless cooking sensor".
- 3. Tap the cooking position display for the cookware.
- 4. Touch the ¢ symbol.
- 5. Use your finger to scroll up to the n symbol. Then touch the 8 symbol to confirm your choice.
- 6. Touch the ¨ symbol on the wireless cooking sensor as shown on the display.
- 7. Select the temperature level.
- 8. Once the signal tone has sounded, remove the lid and add the food. Leave the lid on while cooking.
- Note:
- Deactivating
- 1. Touch the temperature level.
- 195 (90)
- 10 - 20
- 212 (100)
- 20 - 30
- 212 (100)
- 60 - 90
- 212 (100)
- 60 - 90
- 240 (115)
- 15 - 25
- 240 (115)
- 15 - 25
- 340 (170)
- 10 - 15
- 340 (170)
- 10 - 15
- 195 (90)
- 15 - 20
- 340 (170)
- 10 - 15
- 340 (170)
- 10 - 15
- 212 (100)
- 5 - 10
- 212 (100)
- 10 - 20
- 212 (100)
- 10 - 20
- 212 (100)
- 5 - 10
- 212 (100)
- 30 - 40
- 212 (100)
- 15 - 30
- 212 (100)
- 60 - 90
- 212 (100)
- 15 - 20
- 212 (100)
- 45 - 60
- 240 (115)
- 3 - 6
- 240 (115)
- 25 - 35
- 240 (115)
- 25 - 35
- 240 (115)
- 10 - 20
- 340 (170)
- 4 - 8
- 340 (170)
- 4 - 8
- 340 (170)
- 4 - 8
- 340 (170)
- 4 - 8
- 185 (85)
- 30 - 40
- 212 (100)
- 3 - 6
- 212 (100)
- 30 - 45
- 212 (100)
- 30 - 45
- 240 (115)
- 10 - 20
- 240 (115)
- 10 - 20
- 320 (160)
- 8 - 12
- 185 (85)
- 5 - 10
- 195 (90)
- 25 - 35
- 195 (90)
- 45 - 55
- 195 (90)
- 8 - 12
- 195 (90)
- 20 - 30
- 195 (90)
- 10 - 12
- 185 (85)
- 3 - 8
- 212 (100)
- 7 - 10
- 212 (100)
- 3 - 5
- 212 (100)
- 7 - 10
- 212 (100)
- 15 - 20
- 212 (100)
- 5 - 8
- 240 (115)
- 6 - 8
- 240 (115)
- 12 - 18
- 195 (90)
- 10 - 15
- 212 (100)
- 60 - 90
- 212 (100)
- 5 - 10
- 240 (115)
- 20 - 30
- 185 (85)
- 40 - 50
- 185 (85)
- 10 - 15
- 185 (85)
- 3 - 5
- 212 (100)
- 15 - 25
- 320 (160)
- 5 - 10
- 320 (160)
- 5 - 10
- 320 (160)
- 5 - 10
- 155 (70)
- 15 - 20
- 212 (100)
- 15 - 30
- 350 (180)
- 4 - 8
- 155 (70)
- 10 - 20
- 155 (70)
- 5 - 15
- 185 (85)
- 3 - 10
- MyZone™
- Notes
- Activation
- 1. Tap the cooking position display for the cookware.
- 2. Touch the ¢ symbol.
- 3. Use your finger to scroll down to the symbol. Then touch the 8 symbol to confirm your choice.
- 4. Move the cookware over the cooking surface until the power level you require is set. The power level you have selected will appear on the cooking position display.
- Note:
- Changing the power level
- Note:
- Deactivating
- 1. Touch the power level.
- TeppanyakiPro™ Mode
- Panel Lock
- Pause function
- Automatic Shutoff
- Basic Settings
- MyZone™
- ’
- CAL
- --------
- Home Connect
- Notes
- Connection to your home network
- Setting up the Home Connect app
- Note:
- 1. On your mobile device, go to the App Store (Apple devices) or to the Google Play Store (Android devices).
- 2. Enter "Home Connect" in the search field.
- 3. Select the Home Connect app and install it on your mobile device.
- 4. Start the app and create your Home Connect login details. The app will guide you through the registration process. Make a note of your e-mail address and password.
- Automatic Registration in the Home Network
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Scroll left or right with your finger and select the E Home Connect setting.
- 3. The conditions needed to establish a Home Connect connection will be displayed. Touch the 8 symbol to confirm.
- 4. Select the Automatic option and touch the 8 symbol to confirm your choice.
- 5. Press the WPS button on your router within 2 minutes, as shown on the display.
- 6. A message will be displayed to notify you when the cooktop is successfully connected to your home network. Confirm by touching the 8 symbol.
- 7. Now open the Home Connect app on your mobile device and follow the connection instructions on the display.
- 8. A message will be displayed to confirm that connection to the app has been successful. Touch the 8 symbol to confirm.
- Note:
- Manual Registration in the Home Network
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Scroll left or right with your finger and select the E Home Connect setting.
- 3. The conditions needed to establish a Home Connect connection will be displayed. Touch the 8 symbol to confirm.
- 4. Select the Manual option and confirm by touching the 8 symbol.
- 5. A message will appear on the display for opening the network settings of the mobile device. Touch the 8 symbol to confirm.
- 6. You now have 5 minutes to register the mobile device with the SSID "HomeConnect" and the password "HomeConnect".
- 7. Then open the Home Connect app on your mobile device.
- 8. A message will be displayed to notify you when the cooktop is successfully connected to your home network. Confirm by touching the 8 symbol.
- 9. Now open the Home Connect app on your mobile device and follow the connection instructions on the display.
- 10. A message will be displayed to confirm that connection to the app has been successful. Touch the 8 symbol to confirm.
- Note:
- Home Connect Settings
- E
- ø
- }
- ú
- --------
- Note:
- Wi-Fi symbols
- E
- Deactivate Wi-Fi
- Note:
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- 1. To open the basic settings, touch the " symbol on the main screen.
- Software Update
- Information on Data Protection
- Wi-Fi® Module
- Cooktop - Hood Sync
- Notes
- Setting up a connection
- Connecting directly
- Note:
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.
- 3. Select the "Cooktop - Hood Sync" option and touch the 8 symbol to confirm.
- 4. You have 2 minutes to initiate the connection process on the hood. See hood operating instructions.
- Connecting via your home network
- 1. To open the basic settings, touch the " symbol on the main screen.
- 2. Use your finger to scroll to the left or right and select the A Cooktop - Hood Sync setting.
- 3. Select the Home Connect option and touch the 8 symbol to confirm.
- 4. Press the WPS button on the router within the next 2 minutes.
- 5. You have 2 minutes to initiate the connection process on the hood. See hood operating instructions.
- Note:
- Disconnecting from the network
- Controlling the hood via the cooktop
- Ventilation control settings
- A
- 9
- 6
- ¾
- ú
- --------
- Cleaning and Maintenance
- Frequently-asked questions and answers (FAQ)
- Troubleshooting
- STATEMENT OF LIMITED PRODUCT WARRANTY
- THERMADOR® Support
- READ AND SAVE THESE INSTRUCTIONS
7
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Cookware Safety
Hold the handle of the pan when stirring or turning food.
This helps prevent spills and movement of the pan.
Use Proper Pan Size.
The use of undersized cookware will expose a portion of
the heating element or burner to direct contact and may
result in ignition of clothing. Select cookware having flat
bottoms large enough to cover the surface heating unit.
This appliance is equipped with one or more surface
units of different sizes. Proper relationship of cookware to
heating element or burner will also improve efficiency.
Cookware not approved for use with ceramic cooktops
may break with sudden temperature changes. Use only
pans that are appropriate for ceramic induction
cooktops.
Always position handles of utensils inward so they do not
extend over adjacent work areas, burners, or the edge of
the cooktop. This reduces the risk of fires, spills and
burns.
WARNING
RISK OF INJURY
When cooking with a double-boiler the cooktop and
cooking vessel may crack due to overheating. The
cooking vessel in the double-boiler must not come in
direct contact with the bottom of the pot filled with water.
Use only heat-resistant cookware.
WARNING
DANGER OF INJURY
Cookware may jump upward due to fluid trapped
between the cookware bottom and cooking zone. Always
keep cooking zone and cookware bottom dry.
Proper Installation and Maintenance
Have the installer show you the location of the circuit
breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded
by a qualified technician. Connect only to properly
grounded outlet. Refer to Installation Instructions for
details.
This appliance is intended for use up to a maximum
height of 13,100 feet (4,000 meters) above sea level.
This appliance is intended for normal family household
use only. It is not approved for outdoor use. See the
Statement of Limited Product Warranty. If you have any
questions, contact the manufacturer.
Do not store or use corrosive chemicals, vapors,
flammables or nonfood products on or near this
appliance. It is specifically designed for use when
heating or cooking food. The use of corrosive chemicals
in heating or cleaning will damage the appliance and
could result in injury.
Do not operate this appliance if it is not working properly,
or if it has been damaged. Contact an authorized
servicer.
Do not cook on a broken cooktop. Cleaning solutions
and spillovers may create a risk of electric shock.
Do not repair or replace any part of the appliance unless
specifically recommended in this manual. Refer all
servicing to a factory authorized service center.
To avoid electrical shock hazard, before servicing the
appliance, switch power off at the service panel and lock
the panel to prevent the power from being switched on
accidentally.
Electromagnetic interference
WARNING
This induction cooktop generates and uses ISM
frequency energy that heats cookware by using an
electromagnetic field. It has been tested and complies
with Part 18 of the FCC Rules for ISM equipment. This
induction cooktop meets the FCC requirements to
minimize interference with other devices in residential
installation. Induction cooktops may cause interference
with television or radio reception. If interference occurs,
the user should try to correct the interference by:
▯ Relocating the receiving antenna of the radio or
television.
▯ Increasing the distance between the cooktop and the
receiver.
▯ Connecting the receiver into an outlet different than the
cooktop.
It is the user’s responsibility to correct any interference.
CAUTION
Persons with a pacemaker or similar medical device
should exercise caution when standing near an induction
cooktop while it is in use. Consult your doctor or the
manufacturer of the pacemaker or similar medical device
for additional information about its effects with
electromagnetic fields from an induction cooktop.
WARNING
HAZARD DUE TO MAGNETISM
The wireless temperature sensor is magnetic. The
magnetic elements can damage electronic implants such
as pacemakers or insulin pumps. People with electronic
implants should therefore not put the temperature sensor
in the pockets of their clothes and should maintain a
minimum distance of 4" (10 cm) with respect to their
pacemaker or similar medical device.