Use and Care Guide
15
Setting the time display
1.
Swipe to the left to get to the next setting.
2.
Touch the bottom line.
3.
Swipe to the left or right to select how the clock should
be displayed when the appliance is in stand-by mode.
4.
Touch the top line.
5.
Press the SETTINGS touch button to complete initial
use.
6.
Touch the Save touch field.
“First start up finished” is displayed. The appliance
goes to stand-by mode.
Notes
▯ You can change these settings at any time in the basic
settings menu. ~ "Adjust Basic Settings" on page 31
▯ After connecting the appliance to the power or
following a power failure, the settings for initial use
may be shown in the display.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Operating the appliance
You have already learned about the controls and how
they work. Now we will explain how to apply settings on
your appliance. You will learn about what happens when
you switch the appliance on and off, and how to select
the operating mode.
Switching the appliance on and off
Set a heating mode with the function selector to switch
the appliance on.
To switch the appliance off set the function selector and
the temperature selector to the OFF position.
Setting the appliance
Use the function selector and temperature selector to set
the operating mode and temperature.
Use the touch buttons and the touch fields on the touch
screen to enter the different operating menus.
Example: True Convection with 325° F (160 °C)
1.
Turn the function selector to TRUE CONV to switch on
the appliance.
You go directly to the True Convection mode.
2.
Turn the temperature selector to the required
temperature.
3.
Touch the START l STOP touch button to start the
appliance operation.
For heating modes that require a preheat the status
bar appears in the display to indicate the preheating
progress.
4.
When the appliance has reached the set temperature,
“preheating completed” is displayed.
Open the oven door to place the food into the oven
cavity and close the door, or touch the notification on
the display if the food is already in the oven cavity. The
oven continues cooking with the set temperature.
For heating modes that do not require a preheat the
status bar fills in immediately and no notification will be
displayed. The oven starts cooking at once.
Changing the settings of the current mode
You can change the settings during operation. Use the
temperature selector or the touch field of the value you
want to change.
Changing the operating mode
1.
Touch the START l STOP touch button.
2.
Set a different mode with the function selector.
7LPH'LVSOD\
$QDORJ
6HOHFWZKLFKFORFNGLVSOD\LVVKRZQ
/DQJXDJH
'LJLWDO 2II
ZKHQWKHDSSOLDQFHLVVZLWFKHGRII
7UXH&RQYHFWLRQ
³
7UXH&RQYHFWLRQ
³