Installation Instructions
Table Of Contents
- Table of
- Safety
- Safety
- Installation instructions
- Planning information
- Ventilation requirements
- Installation clearances
- Unpacking and setting the rangetop
- Gas requirements and hookup
- Electrical requirements and connection for gas units
- Low backguard installation (optional)
- Burner test
- Final checklist
- Renseignements de planification
- Exigences en matière de ventilation
- Espaces libres pour l’installation
- Déballage et mise en place
- Exigences pour l'alimentation du gaz et raccordement
- Exigences électrique et branchement pour les unité au gaz
- Installation de la plaque de protection basse (optionnel)
- Test de brûleurs
- Liste de vérification
- 9 INSTRUCCIONES IMPORTANTES DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE CONTINUAR
- Información de planificación
- Requisitos de ventilación
- Espacios libres para la instalación
- Mover y anclaje la parrilla
- Requerimientos de gas y conexiones
- Requerimientos eléctricos y conexión para unidades de gas
- Instalación de la consola trasera de protección (opcional)
- Probar el quemador
- Lista de chequeo final
- Blank Page
- Blank Page
Page. 9
Clearance requirements with OTR –
PCG305 ONLY
• 30" (762 mm) minimum to non-combustible material
above the Cooking Surface.
• * Refer to OTR manufacturer’s installation manual for
clearances.
as defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 6'' (152 mm) should be approved by the local codes and/or by the local authority having
jurisdiction.
1
8" (457)
1
8"
(45
7
)
1
8" (457)
0
"
0
"
0
"
30" (762)
30" (762)
30" (762)
0
"
0
"
0
"
*
30" (762)
*
30" (762)
*
30" (762)
0"
0"
5
" (12
7
)
13"
(330)
13"
(330)
13"
(330)
inches (mm)