Installation Guide

Page. 24

Installing the leg covers

To install the leg covers

1. Remove plastic coverings from the stainless steel

covers.

2. Beneath the range, wrap the cover assembly around

the leg.

3. Slide the outer cover up while the inner piece remains

on the floor. The mating part has dimples for which

the holes of the larger cover should seize. You should

feel a definitive click, letting you know that the cover

assembly has been mounted to the unit.

4. Repeat for all visible legs.

• If additional leg covers are required, they may be

ordered from the service center by calling

1-800-735-4328 at no charge for up to one year

after purchase date of the appliance.

Toe kick panel (optional)

To install the toe kick panel

1. Dismount the leg covers from the extruded dimples.

2. Remove the door trim from their mounting clips. (No

tools required.)

3. Remove protective plastic covering from the toe kick

panel.

4. Press the toe kick panel into the mounting clips.

Data rating label

The data rating label shows the model and serial number

of your appliance. The slide-out plate can be accessed by

first removing the kick panel, as shown below.

Electric wiring diagrams and schematics

The electric wiring diagrams and schematics are attached

behind the toe kick, and should not be removed except by

a service technician, then replaced after service.