Installation Instruction

Page. 24
Installing the leg covers
To install the leg covers
1. Remove plastic coverings from the stainless steel
covers.
2. Beneath the range, wrap the cover assembly around
the leg.
3. Slide the outer cover up while the inner piece remains
on the floor. The mating part has dimples for which
the holes of the larger cover should seize. You should
feel a definitive click, letting you know that the cover
assembly has been mounted to the unit.
4. Repeat for all visible legs.
• If additional leg covers are required, they may be
ordered from the service center by calling
1-800-735-4328 at no charge for up to one year
after purchase date of the appliance.
Toe kick panel (optional)
To install the toe kick panel
1. Remove the door trim from their mounting clips. (No
tools required.)
2. Remove the protective plastic coverings from the toe
kick and the sliding adjustment panel.
3. Secure the sliding adjustment panel to the appliance
base with the two provided stainless screws.
4. Press the toe kick panel into the mounting clips.