spec sheet

PRD48WCSGU
48-INCH DUAL-FUEL PRO GRAND
®
RANGE WITH STEAM,
GRIDDLE AND GRILL
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
Page 2 of 6
ACCESSORIES (OPTIONAL)
ACCESSORIES (INCLUDED)
3 Telescopic Racks, 1 Sm. Std. Rack, Multi-Point Meat Probe, 2 Grill Grates, 1 Bx. Ceramic Briquettes, 1 Steam Pan, 1 Lg Broil Pan, 1 Sm. Broil Pan,
Island Trim
PABRICKBKW
Flat Ceramic Briquettes with Basket
PABRICKW
Flat Ceramic Briquettes without Basket
PA12CHPBLK
Chopping Block / Cutting Board
PWOKRINGHC
Wok Ring
PA12GRILLW
12" Pro Grill Plate with Tray, (for Griddle Models),
Non-Fusion Coating
PAGRIDDLE
Professional Griddle, Sits on Top of Grates Over
2 Star Burners, High-Release Coating
PAGRIDDLEW
12" Pro Griddle Plate (for Briquette Grill Models),
Fusion Coating
PA12GRILFW
12" Grill Plate with Tray (for Griddle Models),
Fusion Coating
PAGRIDLFW
12" Pro Griddle with Tray, (Fusion Coating Option
for Griddle Models)
PA12LCVRW
12" Professional Griddle Cover
PA12LCVRN
12" Professional Indoor Grill Cover
PA24CVRW
24" For Grill / Griddle Combination Models
PA48WLBSG
7" Low Backguard*
PALPKITDGW
LP Conversion Kit, Pro Grand Dual Fuel Models with
4 and 6 Burners
PAKNOBLUWG
Metallic Blue Knob Kit
PA48WTKG
Toekick
CS2XLH
Cooking Pan, Full Size, 1
5
/
8
" Deep
CS2LH
Baking Tray, Full Size, 1
1
/
4
" Deep
CS1XLPH
Perforated Cooking Pan, Half Size, 1
5
/
8
" Deep
CSRACKH
Wire Rack
CS2XLPH
Perforated Cooking Pan, Full Size, 1
5
/
8
" Deep
CS1XLH
Cooking Pan, Half Size, 2
1
/
2
" Deep
* Models PCG305xx, PRD305xx, PRD606xx, PRG305xx, PRG304xx and PRD304xx are suitable for 0" rear clearance to combustible surfaces. All other models: when using the included Island Trim
a minimum 6" (152 mm) rear clearance is required to a combustible surface. When installing against a combustible surface, a Thermador
®
Low Backguard is required for a 0" rear clearance to
the combustible surface. A Thermador Low Backguard must be purchased separately. A rear clearance to a surface covered in a noncombustible material (metal, ceramic tile, brick, marble, or
stone) is 0" when using the included Island Trim. Clearances of less than 6" (152 mm) should be approved by the local codes and/or by the local authority having jurisdiction. Clearances from
non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA.
3 / 19
PAALTKITGW
High Altitude Kit, Natural Gas Pro Grand Ranges, 5,400 ft. to 10,200 ft.
Contact Customer Support
High Altitude Kit, Gas or Dual-Fuel Pro Grand Ranges Connected to LP
Gas, 10,000 ft. to 10,200 ft.