Instructions for Use
Table Of Contents
- Table of contents
- Familiarizing yourself with your appliance
- Before using for the first time
- Using the rangetop
- Rangetop recommendations
- Using the oven
- Mode descriptions
- Initial start-up
- Available settings
- Home ConnectTM assistant
- Setting the convection conversion
- Setting the oven offset
- Setting the cooking mode and oven temperature
- Setting the timers
- Setting fast preheat
- Setting the panel lock
- Setting the oven for proof
- Setting the keep warm mode
- Programming the meat probe
- Setting the Sabbath mode
- Initiating remote start
- Oven recommendations
- Home ConnectTM
- Care and maintenance
- Statement of limited product warranty
- Table des matières
- Familiarisez-vous avec votre appareil
- Avant d'utiliser pour la première fois
- Utilisation de la table de cuisson
- Recommandations pour la cuisinière
- Utilisation du four
- Descriptions des modes
- Démarrage initiale
- Réglages offerts
- Assistant Home ConnectTM
- Réglage de la conversion par convection
- Réglage du décalage du four
- Réglage du mode de cuisson et de la température du four
- Réglage des minuteries
- Réglage du préchauffage rapide
- Réglage du verrouillage du panneau
- Réglage du four pour faire lever
- Réglage du mode de maintien au chaud
- Programmation de la sonde thermique
- Réglage du mode Sabbat
- Lancement du démarrage à distance
- Recommandations sur la position des grilles
- Home ConnectTM
- Entretien et maintenance
- Déclaration de garantie limitée du produit
27
Connecting to the network
1. Press SETTINGS to cycle through available options
until “HOME CONNECT SETTINGS” is displayed.
2. Press ENTER.
“PRESS ENTER FOR HC” is displayed.
3. Press ENTER to start the Home Connect assistant.
4. Follow the instructions in the sections
• “Manually registering your appliance in the home
network”, or
• “Connect your appliance to your home network
with WPS”.
Connecting to app
If the Home Connect app is installed on your mobile
device, you can connect it to your oven.
Requirement: The appliance is connected to the network.
1. Press SETTINGS to cycle through available options
until “HOME CONNECT SETTINGS” is displayed.
2. Press ENTER.
“PRESS ENTER FOR HC” is displayed.
3. Press SETTINGS to cycle through available options
until “CONNECT TO HC APP” is displayed.
4. Press ENTER.
“CONFIRM ON HC APP” is displayed.
5. Confirm the connection on your Home Connect app.
Setting the remote start
See “Setting remote start” on page 22.
Setting the remote control
1. Press SETTINGS to cycle through available options
until “HOME CONNECT SETTINGS” is displayed.
2. Press ENTER.
“PRESS ENTER FOR HC” is displayed.
3. Press SETTINGS to cycle through available options
until “REMOTE CTRL DISABLED” or “REMOTE CTRL
ENABLED” is displayed.
4. Press ENTER.
“PRESS 1 REMOTE CTRL ON” or “PRESS 0 REMOTE
CTRL OFF” is displayed.
5. Press 1 or 0 to switch remote control on or off.
Remote diagnostics
Customer Support can access your appliance via Remote
Diagnostics if you ask them to do so, if your appliance is
connected to the Home Connect server, and if Remote
Diagnostics is available in the country where you are using
the appliance.
Tip: Further information and details about the availability
of remote diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.