Installation guide

Installation instructions
The following installation instructions describe
the installation steps for various appliance types:
- Refrigerator units
- Freezer units
- Freezer units with ice maker
- Freezer units with ice-water dispenser
- Wine storage units
Therefore the diagrams may not be a true
representation of your appliance.
Particular reference is made to special installation
steps for individual appliance types.
1. Checking the installation cavity
To ensure a safe, trouble-free installation and an
optimum overall view of the subsequent furniture
front, thoroughly check that the installation cavity
complies with the installation requirements.
Before starting the installation, check that the installation
cavity complies with all requirements for a safe and
trouble-free installation.
Q Checkthe base.
Follow the instructions in the section on "Installation
location" on page 7.
Q Check the dimensions of the cavity.
Q Check that the cavity is square.
Q Check location of the socket.
Also follow the instructions in the section on
"Connecting the power" on page 8 and in the
section on "Installation dimensions" on page 9.
Q Check location of the water connection.
(only for appliances with ice maker)
Also follow the instructions in the section on
"Connecting the water" on page 8.
Q Check attachment of the adjacent furniture/fixtures.
All furniture parts in the vicinity of the appliance
must be connected securely to the wall.
Q Check that adjacent furniture/fixtures do not collide
(door opening angle).
2.. Transport of the appliance
The appliance is very heavy. Be careful, otherwise
people who are helping may be injured or the
appliance may be damaged.
Q Transport the appliance to a suitable installation
location with suitable means of transportation
(trolley, lifting truck or hand-driven truck).
Q Secure the appliance during transportation to
prevent it from overturning.
The appliance is 2134 mm tall. If the appliance cannot
be transported in an upright position due to the
structural conditions, the appliance can be transported
horizontally.
When erecting the appliance, observe the required
minimum height at the installation location according to
the following table:
Appliancewidth Erectionvia Erectionvia
appliancerear appliance side panel
86" / 2185 mm
86" / 2185 mm
86" / 2185 mm
86" / 2185 mm
18"/ 457 mm 853/4" / 2180 mm
24" / 610 mm 871/4"/ 2215 mm
30" / 762 mm 89" / 2260 mm
36"/914 mm 911/4"/2315 mm
18