Installation guide

1×

]]]The number of lower brackets depends on the width

and the design of the furniture door.

23. Shorten the finger guard

The finger guard mLISt cover the entire height of the

door. If doors exceed the standard height, use the

extra long finger guard (see "Optional accessories").

Q Hold the finger guard at the side of the open door.

[_The recesses on the finger guard must be situated

exactly at the height of the brackets!

H×-I1×2 .....

24. Attaching the finger guard

Insert the finger guard into the gap between the

appliance and adjacent furniture (1.).

IZI Clamp the finger guard under the brackets (2.).

i 5×

F_I Push the cap onto the bracket and screw tightly.

F_I Transfer the door dimensions to the finger guard.

Q Using a knife and steel ruler, shorten the finger

guard to the required length.