Installation guide

Side-by-Side installation only:
!i ¸
Q Insert the cover strip into the space between the
appliances.
Individual appliances only:
Q Insert the cover strip into the space between the
appliance and the wooden panel.
26. Aligning the ice-water
dispenser
(for freezer unit with ice-water dispenser only)
The depth of the ice-water dispenser can be aligned
inside the cutout of the furniture door. This allows the
dispenser to be aligned parallel to the furniture door in
order to obtain an optimum overall appearance.
Q Remove covers.
Q Loosen screws on the 4 clamps.
A Appliance
B Furniture
Q
Screw on the brackets (side) for holding the cover
strip.
Q
Insert flat screwdriver into one of the 4 slots and
push the blocks sideways until the ice-water
dispenser are the same distance from the furniture
door.
Q Retighten the screws on the clamps.
38