Installation guide

Q
Q
\
Push cover strips on the longitudinal side into the
gap between the furniture door and glass pane.
Cut the cover strips on the short sides to the
required length.
29. Mounting of air separator
Screw the air separator to the furniture door in order to
separate the supply and waste air.
Q Shorten the air separator to the required length.
Q Attach the air separator with the 2 clamps.
Align the air separator with the center line of the
door as illustrated in the diagram.
Q
Slowly close the door. Check whether the air
separator collides with parts of the ventilation grille.
If required, shorten the longitudinal side of the air
separator by approx. 6mm.
For appliances with ice-water dispenser:
Q The air separator must be cut out in the area of the
hose.
Q Slide cover strips in the gap between the furniture
door and glass pane.
4O