User's Manual

en-us Operating the appliance
12
Automatic door opening
The automatic door opening function supports you in
opening the door. As soon as you activate this
function, automatic door opening moves out and
supports you in opening the door.
Open menu item "Aut. door opening":
1. Press the " button.
2. Scroll to the left to the Appliance settings menu.
3. Press the 8 button.
4. Scroll to the right to the menu item "Aut. door
opening".
5. To change the setting, press the : button.
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
1. Open menu item Aut. door opening.
2. Select menu item Push-to-open system.
3. Press the 8 button.
4. Select menu item Opening force. Here you can
select the level of force required to activate
automatic door opening.
5. Select menu item Opening duration. Here you
can select how long the door should remain open
a crack before it closes again automatically.
9 CAUTION!
To prevent damaging the appliance, do not
close the door while automatic door opening
is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door
opening will re-adjust itself.
Repeatedly closing the door too early will
cause automatic door opening to fail or wear
out.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door
is still ajar. After the selected opening time elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
1. Open menu item Aut. door opening.
2. Select menu item Pull-to-open system.
3. Press the 8 button.
4. Select menu item Opening force. Here you can
select the level of force required to activate
automatic door opening.
Switching off automatic door opening
1. Open menu item Aut. door opening.
2. Select menu item Off.
3. Press the 8 button.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
■ Freezer compartment: +3 °F (–16 °C)
Switching Eco mode on or off
1. Press " button to open the Settings menu.
2. Use> button to move to the menu item Eco
mode.
3. Press the </= button.
The temperature is changed, and the display shows
the new temperature.
Note: You can also switch Eco mode on or off by
adjusting the temperature with the +/- buttons.
Switching ice cube production on and off
9 CAUTION!
Damage to the appliance!
Never store bottles or food in the ice cube
container, even for short periods. This can
block and damage the ice maker.
Ice cube production starts as soon as the appliance
has reached the set temperature.
Note: Ice cube production stops automatically when
the ice cube container is full.
Switching ice maker on or off
1. Press " button to open the Settings menu.
2. Use > button to move to the menu item Ice cube
production.
3. Press the </= button.
Resetting water filter counter
After replacing the water filter, you have to reset the
water filter counter.
1. Press " button to open the Settingsmenu.
2. Use> button to move to the menu item Water
filter counter.
3. Use the 8 button to confirm, and confirm the
query again with the 8 button.
Note: The water filter counter will not be reset if you
abort the query or take longer than 10 seconds to
make an input.