Installation instructions

32
Aligning the ice-water dispenser
(for freezer unit with ice-water dispenser only)
Note:
Avoid misaligning the door while aligning the ice and
water dispenser!
The cover must be centered on the door panel (a)
and
the front surface of the ice and water dispenser must be
aligned exactly parallel with the door front (b).
1. Use a wrench to loosen the nuts on the 4 adjusting
screws.
2. Use a Torx screwdriver to adjust the depth of the ice
and water dispenser with the adjusting screws.
Use a ruler as adjustment aid.
3. Remove the inner cover from the frame by pressing
one side inwards.
4. Place the frame on the ice and water dispenser.
5. Move the ice and water dispenser manually
sideways and up and down until it is centered
exactly in the door panel.
6. Retighten the nuts on the adjusting screws to fix the
alignment.
7. Remove the frame.