Specification Sheet
2 / 22
Page 10 of 13
UCVM36XS
37-INCH DOWNDRAFT VENTILATION
MASTERPIECE
®
SERIES
APPLICATION
- Left or right side exhaust options to preserve precious kitchen storage space or if
ducting is more convenient for these congurations*
- Requires at least 18" of clearance to t the blower and transition
- Blower must be accessible for maintenance
- Elbow and ductwork are not included
FLEXIBLE BLOWER INSTALLATION – LEFT OR RIGHT SIDE EXHAUST EXAMPLE
Left Side Exhaust
Right Side Exhaust
REQUIRED ACCESSORYREQUIRED BLOWER
VTD600P – 600 CFM
600 CFM exible blower can
be installed as an integrated
or inline blower
10
3
/
8
"
(264 mm)
12
3
/
4
"
(324 mm)
12
3
/
4
"
(324 mm)
7
3
/
8
"
(187 mm)
11
5
/
8
"
(295 mm)
5
1
/
4
"
(133 mm)
5
1
/
8
"
(130 mm)
11
5
/
8
"
(295 mm)
5"
(127 mm)
measurements in inches (mm)
10
3
/
8
"
(264 mm)
12
3
/
4
"
(324 mm)
12
3
/
4
"
(324 mm)
7
3
/
8
"
(187 mm)
11
5
/
8
"
(295 mm)
5
1
/
4
"
(133 mm)
5
1
/
8
"
(130 mm)
11
5
/
8
"
(295 mm)
5"
(127 mm)
measurements in inches (mm)
CVTSIDE8
8" round transition allows for left or right
venting. Use with VTD600P blower as an
inline installation, and ducting with 8" round
duct connections.
OPTIONAL ACCESSORIES
EXTNCE5
This cable extends 5 ft. to move the electrical panel out of the way to
offer full installation exibility in any ducting scenario while installing
the downdraft. Ability to connect two cables together to make a
10 ft. cable.
REPLACEMENT CHARCOAL FILTER
UCVFILTER
Includes 1 replacement charcoal lter for
UCVRECIRC recirculation kit
DOWNDRAFT GAS COOKTOP SEAL
TRIM KIT UCV36ST
Includes trim, seal, metal grill, and fasteners.
Required for installations with 36" gas cooktops.
RECIRCULATION KIT
UCVRECIRC
Includes 1 charcoal lter and 1 metal grill
vent plate (blower sold separately). Use
with induction/electric cooktops only.
* For only front downward ducting applications, electrical panel must be remotely mounted. Electrical panel can still be remotely mounted in other exhaust configurations if desired.
Optional 5' extension cable EXTNCE5 accessory is available to connect remotely placed electrical panel to downdraft. Refer to installation manual.
NOTE: Some applications may require deeper cabinets. Side and rear exhaust require at least 18" of clearance to fit the blower and/or ductwork. Refer to installation manual.