User Guide

1105 N. Dutton Avenue, Suite C, Santa Rosa, CA 95401 USA Phone #: 1.707.527.0101 FAX #: 1.707.527.0808

Urban Access Backpack – Product Instructions

For more information please visit: www.thinktankphoto.com

Step 1: Deploy tripod straps from side pockets. Step 2: Deploy tripod cup and strap from bottom

pocket.

Step 3: Place 2–3 feet in the tripod cup and

secure strap. Secure top strap around the tripod

head.

If the tripod moves from left to right, wrap the

strap one full rotation around the tripod and

secure.

TRIPOD ATTACHMENT

Loosen a shoulder on either side and drape the bag around

your neck like a necklace.

SECURE SHOOTING POSITION WAISTBELT REMOVAL WAISTBELT RE-ATTACHMENT

Release hook/loop behind lumbar padding and pull out

waistbelt.

Align and secure “hook” on waistbelt with “loop” behind lumbar

padding.

PAGE 1
Urban Access Backpack – Product Instructions For more information please visit: www.thinktankphoto.com TRIPOD ATTACHMENT Step 1: Deploy tripod straps from side pockets. Step 2: Deploy tripod cup and strap from bottom pocket. Step 3: Place 2–3 feet in the tripod cup and secure strap. Secure top strap around the tripod head. If the tripod moves from left to right, wrap the strap one full rotation around the tripod and secure.
PAGE 2
Urban Access Backpack Instructions For more information please visit: www.thinktankphoto.com To enable access from both side openings, position the dividers using the following steps: SIDE OPENING REAR OPENING PASS-THROUGH DIVIDER LAYOUT Step 1: Position both reinforced dividers so that they span horizontally across the bag. Be sure to leave enough room for your largest lens. Step 3: Re-attach the fabric tab to the reinforced divider. Step 4: On the hinged side use the same technique as listed above.