Cut Sheet

Flexible Cord and Cable Fittings
Aluminum Liquidtight Strain-Relief Connectors
HUB CORD DIMENSIONS (IN.) STD. PKG. WT. PER
CAT. NO. SIZE RANGE (IN.) A B C D QTY. 100
Straight
2920AL
1
⁄2" .125-.375 1
1
⁄8 1
3
⁄4
5
⁄8 — 25 8.50
2921AL
1
⁄2" .310-.560 1
1
⁄8 1
3
⁄4
5
⁄8 — 25 8.05
2922AL
1
⁄2" .500-.750 1
5
⁄16 1
3
⁄4
5
⁄8 — 25 9.95
2930AL
3
⁄4" .125-.375 1
5
⁄16 1
25
⁄32
3
⁄8 — 10 12.30
2931AL
3
⁄4" .310-.560 1
5
⁄16 1
25
⁄32
3
⁄4 — 10 11.90
2932AL
3
⁄4" .500-.750 1
5
⁄16 1
25
⁄32
3
⁄4 — 10 11.50
2940AL 1" .310-.560 1
5
⁄16 1
3
⁄4 1
1
⁄16 — 10 18.00
2941AL 1" .500-.750 1
5
⁄16 1
3
⁄4 1
1
⁄16 — 10 16.00
2942AL 1" .700-.950 1
9
⁄16 1
7
⁄8 3
1
⁄32 — 10 16.70
90° Elbow
4960AL
1
⁄2" .125-.375 1
1
⁄8 1
3
⁄4
5
⁄8 1
5
⁄16 50 23.60
4961AL
1
⁄2" .360-.560 1
1
⁄8 1
3
⁄4
5
⁄8 1
5
⁄16 50 11.60
4970AL
3
⁄4" .125-.375
15
⁄16 1
25
⁄32
11
⁄16 1
15
⁄32 50 17.2
4971AL
3
⁄4" .310-.560
15
⁄16 1
25
⁄32
11
⁄16 1
15
⁄32 50 30.00
4972AL
3
⁄4" .500-.750
15
⁄16 1
25
⁄32
11
⁄16 1
15
⁄32 50 33.09
4980AL 1" .310-.560
15
⁄16 2
1
⁄32
13
⁄16 1
3
⁄4 25 21.50
4981AL 1" .500-.750
15
⁄16 2
1
⁄32
13
⁄16 1
3
⁄4 25 22.36
4982AL 1" .700-.950
15
⁄16 2
11
⁄16
13
⁄16 2 25 18.20
* It may be necessary to remove sufficient outer covering of cable to permit conductors to pass through connector body.
All items shown on this page are suitable for use in hazardous locations where general purpose equipment is specifically
permitted by the NEC. NEC 501-4(b).
UL File No. E-13938 CSA File No. 52391
A-141
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
For wire mesh grips refer
to page A-147.
A
C
B
D
A
C
B
Application
• A liquidtight connector to connect
flexible cord to an enclosure and
provide adequate strain relief
• Form a mechanical grip and water
and liquidtight seal
• Form a non-slip connection
or termination for flexible cord
Cord & Cable Type
• SJ, SJE, SJEW, SJEO, SJEOO, SJEOOW,
SJO, SJOW, SJOO, SJOOW, SJT, SJTW,
SJTO, SJTOW, SJTOO, SJTOOW, SO,
SOW, SOO, SOOW, SV, ST, STD, SVD
Features
• Available in straight or 90° designs
• Designed to accept a wide range of
cables, offering nine fittings that cover
cord ranges from .125" through .950"
• Slotted design gland nut to
accommodate securing in tight spaces
• Installer can simply use screwdriver
to get into the hard-to-reach area
and secure the gland nut
• Marked with cable ranges and conduit
hub sizes
Material
• Body: Copper-free Aluminum
Gland Nut, Grip: Copper-free
Aluminum — all series
Bushing: Thermoplastic Rubber
Grip Ring: Nylon
Environment Classification
• Ordinary locations
• Wet or dry locations
• Temperature Range: -20º C
to 105º C (-4º F to 221º F)
Range
• Cord Range: .125" to .950
• Hub Size Range:
1
⁄2" to 1"
The Ranger
®
Series of Aluminum
Liquidtight Cord Connectors
NEW!
NEW!