Manual
2
G Operating instruction
Thank you for choosing aThomson product.
Take your time and read the following instructions and information completely.
Please keep these instructions in asafe place for futurereference. If you sell the
device, please pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to
specichazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• TV wall bracket
• TV support arms (2x)
• Installation kit (see contents, Fig. 1)
• These operating instructions
Note
Please check that the installation kit is complete beforeinstalling the
bracket and ensurethat none of the parts arefaulty or damaged.
3. Safety Notes
Warning
• Given the multitude of terminal devices and wall structures available on the
market, the supplied mounting kit is unable to cover every option.
• It occasionally happens that the screws for attaching the terminal device to
the wall bracket aretoo long.
• Please note that the supplied wall plugs arefor use with concrete brick and
solid brick walls only.
• Read the operating instructions for your terminal device beforeattempting
to mount it. The instructions provide information about the type and
measurements of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for
mounting the terminal device, purchase these from aspecialised dealer.
• If the wall on which the bracket is to be mounted is made of different
material types and construction types to those specied, purchase suitable
mounting materials from aspecialised dealer.
• Never apply force during mounting. This can damage your end device or wall
bracket.
• If in doubt, have this product mounted by aqualied technician -donot
attempt to mount it yourself!
• Do not mount the product above locations wherepersons might linger.
• Once you have mounted the product and the attached load, check that they are
suciently secureand safe to use.
• Youshould repeat this check at regular intervals
(at least every three months).
• When doing so, ensurethat the product does not exceed its maximum
permitted carrying capacity and that no load exceeding the maximum permitted
dimensions is attached.
• Make surethat the product is loaded symmetrically.
• Maintain the necessary safety clearance around the attached load (depending
on the model).
• In the event of damage to the product, remove the attached load and stop using
the product.
4. Intended use and specifications
• The bracket is used for wall mounting at panel displays for non-commercial,
private household use.
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
Maximum load bearing
capacity:
00132031: 30 kg
00132033/00132402: 50 kg
Screen size:
00132031: 48.0 -122.0 cm (US: 19"- 48")
00132033: 81.0 -165.0 cm (US: 32" -65")
00132402: 94.0 -191.0 cm (US: 37" -75")
Depth: 2.95 cm
Wall mounting plate
dimensions:
00132031: 25.0 x10.0 cm
00132033: 45.0 x10.0 cm
00132402: 65.0 x10.0 cm
Mounting holes:
00132031: according to the VESA standard200x200
00132033: according to the VESA standard400x400
00132402: according to the VESA standard600x400
5. Installation requirements and installation
Note
• Only mount the TV wall bracket with the help of asecond person. Get the
support and help you need.
• Different end devices have different options for connecting cables and other
devices. Beforeinstallation, ensurethat the necessary connections will stillbe
accessible after installation.
• The same mounting kit is included with all of our TV wallbrackets. Depending
on the product and mounting type, you may not need to use the entire
mounting kit. Unneeded screws and other small parts may be left over,even
if the wall bracket is properly mounted. Keep these leftover parts with the
operating instructions in asafe place, just in case you might need them
later on (e.g. should you move, sell the product, mount the wall bracket in a
different location, buy anew TV,etc).
Warning
• This product is suitable for wall mounting only.
• Beforeinstalling the bracket, ensurethat the wall on which the television is to
be mounted is suitable for the weight and make surethat no electrical wires,
water,gas or other lines arelocated at the installation location.
• Please note that the provided wall anchors areonly approved for concrete
and solid brick walls.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions
(Fig. 1ff.).
Note
• Given the multitude of terminal devices available on the market, we cannot
describe all possible mounting options here.
• Please ensurethat the bracket lays at and evenly on the back of the
television.
• Use the enclosed spacer to even out any unevenness on the back of the
television.
• Ensurethat all screws have the proper length and can be mounted until they
arehand-tight (see Fig. 3).
6. Setting and maintenance
Note
Only adjust the TV wall bracket with the help of asecond person. Get the support
and help you need.
• Check that the bracket is secureand safe to use at regular intervals (at least every
three months). Only use water or standardhousehold cleaners for cleaning.
• Pull the safety corddownwards for securing, hang the carrier arms in the wall
plate and let snap into place by releasing (g. 5).
7. Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failuretoobserve the operating instructions and/or safety notes.