User's Manual

29
information for the waiting call shows on the handset display.
• To connect to the waiting call, press the
FLASH/exit button on
the handset, and your original call is put on hold.
• To switch between the two calls, press the
FLASH/exit button.
TIP: Do not press the TALK/END button on the handset to
activate a custom calling service, such as call waiting, or
call will disconnect.
Mute
To have a private, off-line conversation, use the MUTE feature. The
party on the telephone line cannot hear you, but you can hear
them.
1. Press the
MUTE/ringer on/off button. The handset display
shows MUTE.
2. Press the
MUTE/ringer on/off button to cancel and return to
your phone conversation.
Page
The page feature helps you locate a misplaced handset.
1. Press the
PAGE button on the base. The charge/in use indicator
on the base flashes; the handset beeps and Page from base
shows in the handset display.
2. To cancel the page, press the
PAGE button on the base, or press
any key on the handset. Otherwise the paging will last for 2
minutes.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the receiver
volume by pressing the CID/VOL (3or4) button. There are five
volume levels to choose from. VOL 1 is minimum and VOL 5 is
maximum.