User's Manual

Wall Mounting the Base

1. Turn the base over.

2. Slide the pedestal into the slots on the bottom of the base, and then push the pedestal

down until it snaps into place.

3. Slip the mounting holes on the pedestal over the wall plate posts and ﬁrmly slide the

unit into place. (Wall plate not included.)

Base Speakerphone Set Up

NOTE: Changing menu settings on the base will only change the

settings on the base and changing menu settings on the handset will

only change settings on the handset. For example, if you change the

language on the handset, it will not change the language on the base.

Speakerphone Volume

Use the VOLUME (5 or 6) buttons to adjust the speaker volume on the base to a

comfortable level during a call OR press the LINE 1 or LINE 2 button on the base and then

adjust the volume. VOL -1 is the minimum level and VOL-9 is the maximum.

Using the Soft Keys

On the base, there are two buttons under the display box which represent several Soft Key

(programmable) functions. Use these buttons to activate the Soft Key icons that appear

in the display. You may program the following items with the Soft Keys: Caller ID, Ringer,

Base Name, Date/Time, Set Language, Tone/Pulse, Room Monitor, Local Area Code and

Answerer Setup.

NOTE: During programming, you may press the END/CANCEL button at

any time to exit.

Turning the Answerer(s) On or Off

NOTE: The Mailbox Answerer(s) must be ON to hear the voice prompts.

1. Make sure your phone is OFF (not in TALK mode).

2. Press the MENU Soft Key Right (SKR) to go to the main menu.

3. Use the 5 or 6 buttons to scroll to ANSWERER SETUP.

4. Press the SELECT Soft Key Left (SKL) to conﬁrm.

5. Use the 5 or 6 buttons to select MAILBOX 1 or MAILBOX 2 for setting Mailbox 1 or

Mailbox 2.

6. Press the SELECT Soft Key Left (SKL) to conﬁrm.

7. Use the 5 or 6buttons to scroll to ANSWER ON/OFF.

8. Press the SELECT Soft Key Left (SKL) to enter the menu. ANSWER ON/ANSWER OFF

shows in display.