User's Manual

16
Tone/Pulse
You may program independently for LINE 1 and LINE 2.
1. Make sure your phone is OFF (not in TALK mode).
2. Press the MENU Soft Key Right (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to SET TONE/PULSE.
4. Press the SELECT Soft Key Left (SKL) to confirm.
5. Use the 5 or 6buttons to scroll to LINE 1 or LINE 2 for setting Line 1 or Line 2.
6. Press the SELECT Soft Key Left (SKL) to confirm.
7. Use the 5 or 6 buttons to select TONE or PULSE.
8. Press the SELECT Soft Key Left (SKL) to confirm.
Base - Set Local Area Codes
You can progrom the way the Caller ID records are displayed, for up to five different codes
for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx,
and etc.
1. Make sure your phone is OFF (not in TALK mode).
2. Press the MENU Soft Key Right (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to SET AREA CODE .
4. Press the SELECT Soft Key Left (SKL) to confirm.
5. Press the FORMAT Soft Key Right (SKR) to change the length of the CID records.
6. Use the touch-tone pad to enter your 3-digit area code.
7. Press the DONE Soft Key Left (SKL) to confirm the selection.
Base Ringers
You may program the following items independently for LINE 1 and LINE 2 under the
Ringer Menu; Ringer Volume, Ringer Tone, VIP Melody and Key Tone. To access the Ringer
Menu:
1. Make sure your phone is OFF (not in TALK mode).
2. Press the MENU Soft Key Right (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to RINGER.
4. Press the SELECT Soft Key Left (SKL) to confirm.
5. Use the 5 or 6buttons to select LINE 1 or LINE 2 for setting Line 1 or Line 2.
6. Press the SELECT Soft Key Left (SKL) to confirm.