User's Manual

29
Paging the Cordless Handset
This feature helps you locate a misplaced handset.
Press and release the INTERCOM/PAGE button on the base. A list of registered handsets
show in the display, use the 5 or 6 buttons to select the unit you wish to page, and press
SELECT Soft Key Left (SKL) to confirm. The cordless handset beeps intermittently and
displays PAGING FROM BASE for about two minutes or until you press OK Soft Key Left
(SKL) on the handset or press INTERCOM/PAGE on the base.
NOTE: You may still page the cordless handset even if the ringer is
turned off.
Global De-registration
If one or more handsets become lost, you should de-register all handsets to ensure proper
system operation. Follow the steps below to de-register all handsets at the same time.
WARNING: It is not recommended that a handset be de-registered
unless absolutely necessary because once a handset is de-registered,
that handset’s telephone features cannot be used until the handset is
re-registered.
1. Press and hold the INTERCOM/PAGE button on the base until the CHARGE/IN USE
indicator on the base flashes.
2. Press and hold the INTERCOM/PAGE button on the base again until the CHARGE/IN
USE indicator on the base flashes rapidly.
3. Press and release the INTERCOM/PAGE button on the base once. All handsets are
de-registered and PLEASE REGISTER shows in the handsets' display.
Room Monitor
Room monitoring may be done from the base or the handset. Begin with unit you want to
monitor with (the microphone);
1. Make sure your phone is OFF (not in TALK mode).
2. Press the MENU Soft Key Right (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to ROOM MONITOR.
4. Press the SELECT Soft Key Left (SKL) to confirm.
5. The list of registered units shows in the display.
6. Use the 5 or 6 buttons to select the unit you wish to monitor.
7. Press the SELECT Soft Key Left (SKL) to confirm.
8. The first unit will then turn on the microphone and the second unit will turn on
earpiece to monitor sound.