User's Manual

Storing CID Records (In CID Memory)

If you are not at home or cannot answer, your telephone’s Caller ID memory stores the

data for the most recent 40 calls you received so that you can see who called while you

were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is

automatically deleted.

You may review the stored information at any time. Calls received since your last review

are marked as NEW in the display. Calls that have not been previously reviewed but were

received from the same number more than once show as REPT in the display.

Reviewing Call Records

As calls are received and stored, the display is updated to let you know how many calls

have been received.

NOTE: The CID records can be accessed quickly by pressing the 5 or 6

button while the unit is in standby mode.

1. Make sure the phone is OFF (not in TALK mode).

2. Press MENU Soft Key Right (SKR) to access main menu.

3. Use the

5 or 6

button to scroll to CALLER ID.

4. Press the SELECT Soft Key Left (SKL) to enter the menu.

5. Press the

button to scroll through the call records from the most recent to the

oldest. Press the

button to scroll through the call records from the oldest to the

newest.

Dialing a Caller ID Number

1. Make sure the phone is OFF (not in TALK mode).

2. Use the

5 or 6

button to display the desired Caller ID record.

3. Press the LINE 1 or LINE 2 button or handsfree button to dial the number.

NOTE: Depending on (a) how the incoming caller’s phone number is

formatted when it is received, and (b) whether or not you previously

pre-programmed your local area code into the set up menu, you

may need to adjust the format of the incoming caller’s stored phone

number before making the call. Press the FORMAT Soft Key Right (SKR)

while the number is displayed to adjust the number, and try again.

The format option lets you change the format of the displayed number.