User's Manual

44
4. Use the 5 or 6 buttons to select the desired mailbox.
5. Press the SELECT Soft Key Left (SKL) to confirm. ANSWERER REMOTE ACCESS shows in
display.
6. Press the PLAY/STOP on the handset (the 2 button). The message plays.
7. Press the ERASE (the 0 button) to erase the message during message playback.
Leaving a Memo
Base Unit
1. Press and hold the MEMO button on the base. You must hold the button until you finish
recording the memo.
2. Begin speaking after you hear the beep.
3. Release the MEMO button when finished.
NOTE: Message will default record in Mailbox 1.
Remote Access
You can access your answering system from any touch-tone phone by entering your
3-digit security code during the playing of outgoing announcement or after you hear the
outgoing announcement.
1. Dial the telephone number to which the answering system is connected.
2. Enter the security code during the outgoing announcement or after you hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
Belt Clip and Optional Headset
Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of the
handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset to the Handset
Each handset can be used with an optional headset hands free operation.
1. Connect the headset to the headset jack on the side of the handset. The handset
receiver and microphone are disabled when the headset is connected.
2. Adjust the headset to rest comfortably on top of your head and over your ear. Move
the microphone to approximately two to three inches from your mouth.
3. Press the LINE 1 or LINE 2 button to answer a call or make calls using the headset.
4. To return to normal operation, unplug the headset from the jack.