Operation Manual

15
2. LED indicator
- The LED light flashes when it is charging.
- When battery is fully charged, it will stop flashing.
3. Medallion ON/OFF
- Press and hold this key for 4 seconds to turn on/off the medallion.
Handset display icons
Indicates the signal strength.
Flashes when handset is not registered to the base or if you go out
of range.
Displays when making an external call.
Displays when making an internal call.
Displays when having an external call under handsfree mode.
Displays when having an internal call under handsfree mode.
Displays when room monitor is activated.
Displays when an alarm clock is set.
Displays when external ring set to off.
Displays when a new voice message is received from the network.
Battery is fully charged.
Battery is almost empty.
Battery is empty.
If the LCD display shows as below in standby mode:
- The digit « 1 » next to the signal bar indicates the handset number. For example,
if there 3 handsets connected to this base, each handset will be allocated a
different number from 1 to 3.
- 02/12 is the day and month number. 11:15 indicates the time.
- The two digits shown after the N symbol indicate the number of missed/received
calls. In the above example, "02” indicates the number of missed calls and “04”
the total number of calls received.