Operation Manual

25
Base Settings
Delete handset
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key, the display shows Delete HS on the top.
3. Press MENU/OK key and use keypad to enter the PIN code (default as 0000).
4. Press MENU/OK key. Scroll ▲/▼key to the handsets/medallions that registered
to the base and select the one you want to delete.
5. Press MENU/OK key to confirm. The handset will be deleted from the registered
list.
Dial mode
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key, scroll ▲/▼key to Dial Mode.
3. Press MENU/OK key. Scroll ▲/▼key to Tone or Pulse. Press MENU/OK key to
confirm.
Recall time
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to Flash Time.
3. Press MENU/OK key. Scroll ▲/▼key to select the desired recall time among
100ms, 300ms and 600ms. Press MENU/OK key to confirm.
Modify Base PIN code
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key, scroll ▲/▼key to Modify PIN.
3. Press MENU/OK key, the display shows “PIN Code?”.
4. Use the keypad to enter the current PIN code and press MENU/OK to confirm.
5. If the old code is valid, the display shows New PIN, enter a new PIN code (4 digits),
press MENU/OK to confirm. Then the display shows “Repeat: ”. Enter the new
PIN code again.
6. Press MENU/OK to confirm. The code will be stored to the base and a tone
sounded.
PABX Number
PABX number is a number that you need to add before dialling the phone number
you making a call.
Remark: The
preset PIN is
0000.