Operation Manual

26
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to PABX Number.
3. Press MENU/OK key. The screen shows “Number ?” Use the keypad to enter the
PABX number and press MENU/OK key to confirm.
Remark: After the PABX number is set, the outgoing call would be added with the
PABX number automatically. If PABX number is not necessary, please do not set it.
Language
This menu is for selecting language of medallion low battery voice announcement,
SOS call and room monitor prompt. There are 2 language for selection: language 1 is
French, and language 2 is Spanish.
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to Language.
3. Press MENU/OK key. Scroll ▲/▼key to select Language 1 or 2. Press MENU/OK
key to confirm.
Settings for Conecto 100
This menu is used for modifying the settings of medallion registered to the base.
 Internal/External Ring
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to CONECTO 100.
3. Press MENU/OK key and select the medallion you want to change the settings.
4. Select INT Ring or ETX Ring. Press MENU/OK key. Then you can select the
ringtone and adjust the volume for the internal/external call.
 Vibrating
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to CONECTO 100.
3. Press MENU/OK key and select the medallion you want to change the settings.
4. Select Vibrating. Then you can set the vibration on or off.
 Audio Setup
1. Press MENU/OK key. Scroll ▲/▼key to Base option.
2. Press MENU/OK key. Scroll ▲/▼key to CONECTO 100.
3. Press MENU/OK key and select the medallion you want to change the settings.
4. Select Audio Setup. Press MENU/OK key and scroll ▲/▼key to adjust the
speaker volume of medallion.