Operation Manual

35
Add extra handsets and medallion to the base
Registration is the process to link a new handset/medallion to the base. A maximum
of 5 handsets/ medallions can be associated with this base. This base is compatible
with Thomson’s handset and other GAP-compatible handsets.
Handset/medallion battery must be fully charged and you must be closed to the
base for registration.
Handset/medallion that supplied inside this package is already registered.
1. At the base: Press and hold the PAGE button for 5-6 seconds till the red LED
start flashing.
2. At the handset: Press MENU/OK key. Scroll ▲/▼key to select Registration. Press
MENU/OK key and select the base. The base with a “√” to the right side of the
base number on the display is already in use.
Press MENU/OK key and enter the PIN code (default as 0000). Press MENU/OK
key again. The handset will start to look for the base and the display will show
Searching 1… (2, 3 or 4). For successful registration a confirmation tone will be
heard from the handset and antenna mark on top of the display at left side
appears with the handset number for internal call use.
3. At the medallion: after the red LED starting flashing, press SOS key one time. A
confirmation tone will be heard from the medallion.
4. Once the handset/medallion is registered to base successfully, it would start to
ring if pressing the PAGE button on base. This allows you to verify that the
pairing has been done successfully.
5. If the PIN code is incorrect, the handset returns to standby after 2 minutes. Try
registering again.
PAGE